Recent content by cflipper

do you have any pics of your finished product

ya i do like the looks of the GOBI i would rather support the smaller shops. i will post up some pics as we get going thanks for the info i ended up purchasing a 42 inch thanks again

i am in the preliminary stages of fabricating a whitson or gobi style roof basket and need to order up my light bar. so i am wondering what style and size people are running on there baskets? curved or straight and 40 inch 42 inch or a 50 inch. i assume that the 50 will be too large for a...

Clay bar and wax her to make her Shiney again did headlights and paint the front grille sparkly clean Sent from my SM-G930W8 using Tapatalk

i did get that what i did to solve at the time and really haven't had any issues is lower your spare and while cranking in up push it (the spare) toward the front of your truck and this will buy you some space.

Hi everyone I am looking to change out my fog lights in my 04 What options are there out there to change the look of the fogs thanks for taking the time

Don't leave us hanging the suspense is killing us

My concern is that original poster said battery was dead and replaced the battery I recently had all the same symptoms turned out my alternator was cooked since I replaced haven't had any issues (I also replaced the battery too) hope this helps check and see what your alternator is doing Sent...

Thanks man when I get stuff all finished up I will take picks and post details for others here is some of the information i found to put it all in one place so others can find it easy general description of the studs are M12-1.50 Serrated Wheel Stud - 14.20mm Knurl, 55mm Length 1. ARP Lexus...

i just measure with callipers to get the studs flush with the top of the nuts i need 8mm on front and 4mm on the back does anyone know if there is options for studs from toyota thanks again

struts are a whole other job as far as the alternator goes if its running i wouldn't but that being said if you do local driving i wouldn't but if you are concerned and have a large trip or go back country or something i would overall it depends on the condition of the unit mine was cooked. if...

I just installed some 1.25 inch spacers on my 03 4runner and the studs are about 1/4 inch short. does any one know what size or part number for the replacement studs are? I searched but couldn't come up with anything thanks ahead of time you guys are always super helpful

i live in an area where i get pretty heavy snow fall in the winter i kick my feet off before i get in the snow melt usually just evaporates on the mat or like someone else said shop vac works great. as for the holes for the retainer clips i can't i have seen any water leak into them. the mats...

Awesome write up i just did my alternator today on my 03 v8 4runner it took me 2.5hrs here is my step by step on the removal not quite as detailed just a few minor things i did different 1. Remove neg battery cable 2. Remove coolant overflow 3. Remove air intake and hoses 4. Remove upper...

I will check the tire size for you I painted the rims with a semigloss plastidipped the emblems roof racks and anything that was silver. Personally I would keep the emblems plastidipped and then take the time and paint larger things the plastidip is great for figuring out what you want to do for...