Recent content by ClintR2

automatic. 230,000 miles

Anyone have any ideas on this?

mholme. No not that throttle stop screw. The set screw that is by the TPS on the back side of the throttle body.

COMTB —the timing right now at idel is well past the 10degree mark. It is probably at 40 degrees. If I then it down to 10 degrees it just dies. I am setting setting it with timing light that has a dial on the back where you can adjust the degree setting. If I leave it zero degree on the gun and...

No codes at all.

I am working on getting the timing adjusted and set in 1992 3.0. I have tried to get it set at 10% but I can not get it to set and stay there before dying. The idle adjusting screw does not seem to speed it up so I can adjust it. I am adjusting the set screw by the TPS tonhelp speed it up some...

There is an adjustable screw by the TPS sensor. Is this suppose to be touching this dashpot piece? Thought maybe this would help since it is running so rough This picture is the the engine off and no throttle pressed in.. https://photos.app.goo.gl/2QzaiKCyxxomeqsM9

Update—was still getting a code 22. Coolant Temp Sensor. So I thought what the heck let me change it. I also changed the coolant temp sender b/c it was reading a smaller number when cold with the multi meter. Took them out and replaced with OEM ones and Boom!!!! The code 22 is gone! I thought I...

I tested out The sensor. I tested and hot and cold water. In Coldwater it would read .89 and then in hot water it will drop down to .25 this tells me that it is working. There must be something in the wiring then. Does this sound right? Also attached the picture it the peice that I took out...

Went to junkyard to get ecu. Did not have one. Bummer. While there I got another igniter to test out. Just to see if I had a faulty one. Got home, installed it and started up. No check engine light. Did not run the best by no light. But engine started to warm up and boom!! Code 22. Coolant temp...

I am planing on getting one tomorrow. Is is a basic plug and play? I cleaned the hoses yesterday and they check out. I will keep you posted on what happens tomorrow.

Now I am getting all kinds of things going on. Code 14,22 and 41 Unplug tps while running and no change in engine. No idle up or down. I think that the ECU has something wrong with it. Just so many random things and I have addressed all the issues. New throttle body put on today and ran fine...

forgot to mention. that i had it running the best i could with out the tps plugged in. ran rich, not Much power but able to get around. figured i would try to get it 100% right. This is just a trail rig also.

The previous owner told me that i did run good before. When i bought it he said i needed new tps sensor. i replaced, plugs, wires, rotor, cap, shift sensors, valve cover gaskets , ignition coil , coolant sensor and other things. All items were OEM replacements...

So i went to the junkyard and found a throttle body with TPS on it. I connected my harness up to it and Boom! I was getting correct readings. SPOT ON!! brought it home clean it up. installed it and it started right up and Code went away and was running perfect for about 1 min. THEN it...