Recent content by CZ75

  1. C

    Write-up: How to Disable (Bypass) the TPMS

    I had thought about installing a switch instead of the jumper years ago but never got around to it. I have 2 sets of tires and figured it would be nice to disable the TPMS monitor when the off road tires were on and switch it back on when the on road tires were mounted. Several years ago the...
  2. C

    Voltage at ECU-IG fuse

    I read on another thread about a connector at the driver side rear wheel well. I cut the wrap around the connector and it was dry, so it got taped up again. I never had water accumulation on that side of the truck. The driveway the truck is always parked on is slanted in a way that the...
  3. C

    Voltage at ECU-IG fuse

    The only electrical tape cut was the tape wrapped around the wire bundle shown in the previous pic. It was only 1-2 wraps with tape. The connector itself was not wrapped. Only the connectors shown were touched. Unplug, spray both sides with QD contact cleaner and reinsert. Getting a good...
  4. C

    Voltage at ECU-IG fuse

    13.01V today... Moved the truck a couple times yesterday so the wife could pull her car out of the garage. I would have expected the battery to be drained some from that if there was still a battery drain issue, but it revived voltage as a battery should. Pretty confident the problem has been...
  5. C

    Voltage at ECU-IG fuse

    Just to clarify, it was the front amber parking lights (always on when driving) that were flickering on and off when the key was out of the ignition. 24hrs after removing the charger from the new battery connected to the vehicle, voltage taken at the battery terminals is stable at 13.02V. I...
  6. C

    Voltage at ECU-IG fuse

    Voltages at (RR WSH), (ECU-IG) and (IG1) locations in the fuse box before and after cleaning the connectors. All 3 fuses removed - Before - 4.68v @ (ECU-IG) others were zero V. - After - 4.3v @ (ECU-IG) , others zero V. (IG1) fuse in, other 2 removed Before - 4.72v @ (ECU-IG) Before -...
  7. C

    Voltage at ECU-IG fuse

    I should add some background on this: Heavy rain last week caused a puddle in the driver side foot well when the truck was pointed downhill and in the rear cargo area passenger side when parked uphill. I cleared all 4 of the moonroof drains over the past few days and have a lot of the...
  8. C

    Rear Wiper Won't Stop

    New battery didn't fix the electrical issues. Now the key FOB isn't working where before it did. Cleaned out all 4 moonroof drains. Front were easy, but spent 2 days on the rear. Cleared the passenger side rear first removing the 2 interior panels to get better access to fish up the tube...
  9. C

    Rear Wiper Won't Stop

    I'm troubleshooting this issue on my 2006 4rnr. Neighbor told me the rear window wiper was turning on and off a couple days ago. We had a heavy rain so I'm sure the root cause is the sunroof leaking. Puddle in the driverside footwell when parked downhill and right rear passenger side when parked...
  10. C

    Voltage at ECU-IG fuse

    What is the voltage at ECU-IG (10A) fuse under the driver side panel supposed to be when the key is turned off? I'm getting 3.1V Turn the key on and have 12.7V at this fuse. If the IG1 (15A) fuse is pulled while measuring voltage at the ECU-IG, voltage jumps up to 4.1V (key is still off)...
  11. C

    Rear Wiper and Ignition

    I've got this issue now after a heavy rain. Have a moon roof and suspected for years that there's a leak. Can hear water sloshing around overhead when taking a turn. I silicone sealed the roof rack bolts so I don't think it's leaking from there. If the truck is pointing down when parked, water...
  12. C

    Wetness on carpet in rear corner near hatchback door

    I've had a leak for years and thought it was coming from the bolts that hold the roof rack on so I used silicone on those bolts. It helped a lot, but now I'm thinking the moon roof is leaking and the water runs down a channel in the roof to the rear. Sometimes see water spots on the inside of...
  13. C

    Rear bumper options

    He replied to my email last night. Seems he's retaining a lot of the bumper cover so I'll have to see if that will work in my case or not.
  14. C

    Rear bumper options

    I like his 5th gen plate bumper. I might just reach out to Mr Nguyen to see what he's toying with for the rear of the 4th gen. :)
  15. C

    Rear bumper options

    Thanks, but I'm looking for a plate bumper that replaces the rubberized cover. With a tube bumper I'd still need to replace the bumper cover that's damaged.

Members online

Forum statistics

Threads
278,309
Messages
3,554,075
Members
248,016
Latest member
Advally Service
Back
Top