Recent content by Dinabox

Sold. Please Remove Thread.

Here are mine for reference

Curious about your tuning maps! Where you're at it's about 5300 ft elevation, I'm around 4300 in Reno, NV. My fuel maps are pretty much 1.1 - 1.2 all the way up to 8 psi and my WOT hits around 11.2 ish with the 2.2 pulley and 7th. You shouldn't need that much fuel at your elevation right...

Bump. Still for sale!

Bump. Nobody wants these?

Still for sale!

Up for sale is my old set of LC coils and Tokico Shocks for the rear of your 3rd gen 4runner. The coils I got used and had on for at least 50k, they gave around 4 inches of lift after they settled. I got the Tokico's to replace my Bilsteins when they started leaking, didn't really like the...

Aren't the IK22's gapped at .032 right out of the box? https://www.densoproducts.com/product.aspx?zpid=11179

That's your call, mine was original and lasted close to 300k, if it's dry maybe don't mess with it, but it would really suck if you did all that work to replace your clutch, believe me it sucks, and then your rear main starts leaking shortly thereafter. Your call man!

Well, this weekend I replaced my radiator that was original, had around 300,000 miles on it, with a Champion all aluminum #CC1998. Replaced the original clutch with Marlin Crawlers kit, along with a new rear main seal that was leaking, along with new master and slaves for the clutch. Took out...

I believe the supercharger takes 4 ounces of oil. I always put one bottle in mine when I change it.

There is a o-ring that supposedly seals it. I bought some right stuff gasket maker and sealed mine, no leaks ever again.

Thanks guys. I just got done replacing all the hoses and put good clamps on all of them. Those hoses were such a pain to get off, ended up taking the hood off and climbing in the engine bay. I noticed those leaks as I was tearing the supercharger off to replace the nose cone seals and the...

I have a coolant leak, not a head gasket for sure. It's not dripping anywhere but it's located on the firewall, where the heater core valve is. It's all crusty on these two hoses. What I'm wondering is if I should just replace all the hoses, maybe even the heater core valve? My heater core...