Recent content by djrazr

I'm sure you have service records???

Mileage?

bump

Re: Re: Need Help...Air Flow Meter Connection Rough Idle It's a 95 4X4 V6. The screws are tight. I have some CRC electrical cleaner from vato zone, but it's not safe for plastics, so i didnt spray I drove around today for a few miles, and she was ok. Just a slight up and down when idling...

Just picked up a 95 4runner v6, and i'm going through it and found these 2 loose connections. Is this right? Could be why my CEL light is on? <a href="http://s51.photobucket.com/albums/f387/flxzx9r/?action=view&current=plug010.jpg" target="_blank"><img...

I was having problems at the air flow meter connection. She was idling really rough, black smoke coming out the exhaust, and cutting off I noticed if i lifted right at the connection slightly, she would smoothen out, and then white smoke would come out of the exhaust. There is a hole in the...

How many lbs can a 4X4 4Runner haul around?

Cant believe i missed it The 2nd pic attached that hooks up to the the AFM. The right side of the harness has a little plastic piece that broke off (not pictured), so i believe that is my problem, and why i could not get a tight fit, having to lift the harness to smooth out I'm on search for a...

I just read it, and it says to protect all plastic, so i guess its not good for it. The clip is made out of metal, easily bendable, and i reshaped it. It holds the the connection together pretty tight like before. It's just now, if it just sits there, she runs rough until i slightly lift the...

Your asking price?

So i hooked it up with the clip, and she was running rough like the past few days. I noticed when i slightly lifted on the connection at the AFM, she smoothed out, but once i let go, she started rough again. I know its something simple, but i just cant figure it ou The electric cleaner i have...

Can i just spray some electric cleaner? I tried the dealer for a clip, and they dont sell it. You have to buy the whole harness which comes with the clip. It has to perfectly sit straight and tightened

I opened up the lid on the AFM. All the soldering looks good and the other wires are all connected, so it looks like nothing came undone. As far as the plug i removed, Here is what it looks like. I took off the rubber covering around the plug, and there are only 6 wires. So this plug here is...

Found out i dont have a MAF. I have an AFM. Reading around and gonna cut the sealant around the top, peel it off and check it out. Hopefully i can solder it, if not, off to the junkyard i go Toyota never should have put screws there because those screws should never be removed.They should have...

I just pulled the top lid of the air box off, with the maf sensor still attached. Waiting for an answer to see what i can do