Recent content by djrocketodd

did a test today 03 v8 4x4, pulled the connector ABOVE the one in the pictures with white and green. The one I pulled had RED BLACK WHITE. It tripped the ATRAC VSC ABS lights and turned of those functions, and worked great. Next I will cut the RED ground wire and splice a switch in line...

do you have links for their build i tried searching the names but it didnt work for me, I got "invalid user specified"

Sounds awesome ! Thanks for thinking of this mod. I do a ton of night remote highway driving. These are getting ordered today !!

Its hard to see the difference in the pictures probably because the camera is in auto feature. Can you describe if the light output is substantially more for driving? was looking at doing this as well but I wasnt sure how good those rigid lights work, especially that low to the ground. Do you...

I'm having some difficulty onthe terminology used when talking about exhaust systems, I have a 03 v8 with a monster exhaust leak (headers) so i'm going to order either the magnaflow headers or the other ones... cant remember the name. anyway i figured might as well do the whole exhaust. so i...

back to the original title of magnaflow. has anyone tried these? MagnaFlow® - Toyota 4Runner 2003-2004 Direct Fit Catalytic Converter with Header

i would definitely be in, same conditions as others retain cats somewhere, so it wont throw O2 codes price not more then stock (including cats) dont need extra fabrication to hook to existing exhaust (BOLT-ON) Mines starting to go at 120k (kms) Hope to see something able to be done for our...

1) RiDE - 5th Gen - Front bumper 2) ChildrenOfBodom - 3rd Gen - Front bumper w/ single hoop 3) azn-sensation - 5th gen - Full Skids (bare metal) 4) faster4runner04 - 3rd Gen - Rock Sliders- Semi gloss black 5) proquip - 5th Gen - Rock Sliders semi gloss black 6) ROVENTE - 3rd Gen (1999) T4R -...

as the title says i am looking for the center lower seatbelt clip and tether for a 4th gen, mine got crushed Thanks

besides the sticker, no real way to tell, but for 800 at a dealer they can replace timing belt and water pump, or get the kit for about 250 online and diy

dei has them most shops here sell it for 40$ and install for 50$ they learn the code needed and you dont loose a key

pulling the cluster literally takes 2 minutes. 2 screws at bottom of panel below steering wheel, pull it off, pop off the black panel around the bezel, unhook 2 plugs on back (dimmer and something else) remove 3 screw 2 bottom one top for the cluser, (dull grey) unscrew shiny gold screws that...

not to fear my odo works now, i just bent a pin when putting it back together. :)

run whatever you need to so the tires show even wear. i run 44 psi on LT tires and they wear even on stock i even pumped them up a bit because i was getting sidewall wear at 32 psi on a P tire

the odo still works and counts up.. does anyone with experience with these kind of displays know if its the display thats broken, the board that broken? or maybe just a bad connection?