Recent content by DLPDLP

I knocked mine off with a chisel and a hammer. And I did it carefully! But they will come off. I held the window firm and had my wife tap them off actually. No broken glass or scratches. Mine were all rusted.... like your probably are. Best part is Toyota is going to show me the trick to...

The rubber holds the glass. The metal channel has a groove, the rubber slides into that groove. The rubber is tiered, or sort of "steps tighter and tighter, so once you shove the glass all the way in, the rubber is forced by the channel to hold the glass very tight. My job is not complete. I...

Got the old window out, tracks off, am trying to reuse tracks and rubber from an old window I had. Man that track was rusted and ready to break. NewVillian.....my question is........ what technique did you use to reseat the window in the tracks/rubber? I've got it close, but not fully seated...

Makes sense. Thank you NewVillians! DLPDLP

Did you take your glass out by raising it enough to get to the rails, or will I need to remove the interior metal plate and plastic trim and all that junk? Thanks !

I'll post the part number once I get them ordered. I'm wondering if I can "raise" the window far enough to replace the tracks and rubber. If anyone knows, let me know. Seems like I recall having my tailgate down, and then tripping the safety catches so the window would work and I could raise...

Thank you sir. I'll update you on the repair once completed as this might help others. Best regards, DLPDLP.

Rear window Did you buy the new window rails and rubber parts from a Toyota dealer? Had you noticed the window lifting slower? Mine was lifting slower than normal the last few months now that I think of it. Sound familiar? Thanks for your prompt reply!

My rear (very back) window stopped working. I can hear the motor try to move the window, but it won't move it without me pulling or pushing the window up or down. Window seems to be in the holder okay, it does move down easier that up. Do the teeth on the motor go bad? (get worn). It seems...

Thanks you Bad Vision! I'll check that link now! Again, thank you. DLPDLP

Signals work fine if no running of headlights on. With any lights on... the left signal lights up and stays on and sometimes the dash lights and clock flash. I'll check my bulbs tonight, but if it is the signal switch, is it easy to replace? Thanks all !!!! This is on a 95 4 cyl SR5, never...

BFG ALl-Terrains with KO side and rim protector. They are awesome tires in most situations except serious mud. They might not look as tough as others but will perform better and last forever! That's my experience anyway. Good luck.

Catalytic Converter I unbolted the rear and saw no build up on the back side of the screen/mesh so I assume it's not "clogged" as my mechanic suspected. If you do anything to your, be careful what you use so you do not tear the mesh! DLPDLP

Owned my 95 SR5 since new. I have apic of her when she was 2 days old. So shiny was the red. Now she's beat up and well used and I love her more than ever. considering a body makeover. Warn 8000, rook rack, kc lights (need side and rears) BFG's 31x10.5x15's on stock suspension. I've rarely...