Recent content by geofox784

FYI to anyone that finds this thread, I am still making these for anyone that wants one.

Well check that out. That was not available when I ordered mine. Yes, it should just be plug and play if you get the 6v version.

XL6009 should work. Also, I switched to a better camera that is a true 180°. Every camera I found on amazon that advertises 180° is actually quite a bit less than that. With the true ultra wide camera I can see oncoming traffic when backing out of a parking space.

I'm actually the guy commenting back and fourth with the Chinese FB user. Hopefully I can convince the creator to sell me the CAD drawing so I can have a local shop fab it. Otherwise I'll try welding on some additional sheet metal. I'll post updates.

So the 1/8” bolt on plate you mentioned earlier failed? Do you think welding a 1/8” plate on would work? Did you ever make that strut?

Has anyone figured out a lasting solution to this? I’ve got a heavy Genesis off-road dual battery kit and do a fair amount of hard wheeling. Just noticed the crack yesterday. Had anyone welded some DIY fender stiffeners or attached additional bracing from the frame?

I also found that 48818-60080 is confirmed the WRONG size. It's too large. 48818-60020 is what you want.

Maximum travel I installed these before my Moab trip last week. Easy install and I am happy with the results. However, the maximum length of shock that these allow seems to be shorter than previously stated in this thread. I installed them with FOX 883-26-006 shocks, which are typically for a...

Any reason you unbolted the sway bar at the axle mounts instead of just removing the 4 bolts that go through the spacers? I have the C4 skid as well and never had any reason for it to get in the way during the install.

This thread has great info on what you can and can’t do with KDSS and how to fit longer shocks. Maximize your KDSS + extended travel shocks

They are the tundra shocks. It’s what accutune recommends for a non KDSS kit and it comes with longer brake lines. They reach max compression 1.6” sooner than stock, but they have 2.5” more max extension vs stock. The other option is to get the kit they recommend for KDSS 4runners, which is the...

Not sure. Whatever fox uses to measure. Straight from their website. After reading through this thread a second time it definitely looks like these will work just fine.

Can anyone confirm what the max amount of extension is that these will be compatible with? I'm looking at having ordering a pair of these, but they have a whopping 25.020 extended length and require extended brake lines.

So what is the final consensus on the part number for the bushing? It looks like some people said that 48818-60080 is not the correct number, but some posts were edited so it is hard to tell. Edit: 48818-60080 is the wrong size.

The problem with running it through the cigarette lighters is the cigarette lighter ground goes through the wiring harness built through the car and creates RF interference havoc. You need to find a way to get the ground from the cigarette lighter to get to the car frame as quickly as possible...