Recent content by GingerB

So, the headlight gremlin is back again. I have replaced the relay for them with a NAPA one. The auto-shutoff feature is gone now, but I don't care about that. Biggest issue now is that the low beams and high beams won't turn on. I can flash the highs manually when pulling back on the stalk...

Lights are now staying off. If it happens again, I'll check those voltages and post again. Sorry for the delay, but it's been kinda hectic lately.

No evidence of aftermarket items at all. OEM alarm system is installed. Yes. High beams switch on and off like normal, and indicator light turns on and off, while the truck is running. It's the low beams that stay on after the ignition is off. Didn't try to turn on high beams with the truck...

Still running rough occasionally on this tank of gas, and I'm halfway through it. Forgot to mention I used the mid-grade octane (89) hoping it would help. Also randomly throwing up a P303, cyl. 3 miss-fire, when it does run rough. And the CEL will either flash, or stay on steadily for a little...

I can totally understand people not using forums correctly and returning the favor, or at least giving an update. Came from Subaru community here in MN, and the local forum is very tight-knit. So, basically the issue right now is the lights stay on after turning the truck off. This is with the...

What was the issue? Having same problem here.

Not seeing this relay on my 99 Limited. See attached pic. Also, the pic links above are not working.

Hesitated and stalled on the way home from the shop at around 20 miles. Towed it home. Decided to order another fuel pump, thinking I got a defect, and planned to remove the tank again in a few days. But in the meantime, I decided to try a couple bottles of Heet to remove any water from the gas...

Couldn't get the rusty bolts loose, so took it to my friend's shop. He got the fuel pump swapped out. It's a Denso from rock auto parts. Driving home and about 15 miles down the road on the freeway, it starts lurching again. Was not liking it when I gave it more gas. Now I can't get it started...

That's what I'm thinking now. I checked the plugs and they were fouled badly. Changed them, still nothing. Opened the fuel line in the engine bay near fuse box, no spray and bone dry. Just got done swapping the fuel filter hoping that was the issue, still no change. Fuel pump should be here...

I'd like to know how many miles was on your truck when you swapped the pump. I'm having a very similar situation. So far, I've swapped the MAF and plugs, no change. I changed out the fuel filter and still nothing when I'm cranking it. Before and after I changed the fuel filter, I checked the...

Ugh, that's going to be another $130. Weird thing is it was running just fine, except for the CEL, but as soon as I removed the MAF, cleaned it, and re-installed, it can barely idle for more than a couple seconds, or not even that long.

P0171, then stalling. '99 Limited V6 4x4, 193k miles. P0171 came up a few weeks ago, cleared. Came back again. Truck running fine, but decided to get this code taken care of for good. Removed the MAF, cleaned with CRC MAF cleaner twice, let it dry overnight, replaced. Idled fine, blipped the...