Recent content by Grinch

Just to let you know, the lights will stay on with the trigger using the same power source, but when you pull the trigger, the lights will go off and then back on....anyway, I went from having everything working, to it all breaking apart :) Unfortunately, the sound only seems to work when the...

I got the sound to work. Just mentioning it real quick. I put the magnet thing on the gold center to complete the circuit. I then touched one wire from the trigger attached to one lead of the trigger's switch (which is a momentary on switch...non-latching btw) to the postive electricity area...

I meant the trigger, not switch.

I have two wires coming from the switch: one to each lead. if I tap on the gold middle part with even just one of them, it activates sound, however, if I hold there and try to click the switch, it will not play sound...only happens if take the wire off and then tap it again. Not sure why there...

Hey guys, looking for advice on this sound board I have here..check the pics. the way it works is that little magnet looking thing touches the circular gold looking leads in the middle and the sound plays. There's a button on the side that allows it to record, but it doesn't require the button...

I think I'm finished with the lights. I decided to stick with what I had vs. running them up the controller. I took some old flexible tubing I had used for running wire back in the day and spray painted it black. I then cut 4 snips at the bottom of it to be able to squeeze it into that space in...

The 3/8" washers have been a pain. I've had to do some serious dremeling to get them to fit right. The problem is any that were a size down were too small and it was hard to tell what would actually fit right in the joystick. so I'll say, if I had dremeled both sides of the joystick down a...

Thanks gaterose. I might check into the flexible material...not sure about that particular one, but some kind of flexible material that you can bend like that makes sense. To answer your question, I didn't put them into the shifter for a couple reasons: once the washers are in there, there's not...

Here's the pic of the washers with the nut on the right side of the joystick.

Hey guys, First, I've been reading this website's forums a lot lately and it's been very helpful in a number of areas, so thanks in advance for all the great feedback and help. I have a 4th gen 2004 SR5. Here's the scoop: after reading through some of the cool shifter knob forums, I thought I...