Recent content by impervious17

let me know what you got. socal.

Adjusted Bilsteins to 1.75 from .85 and installed the toytec superflex with a 1/4 spacer on front driverside to correct the lean. I should have went for the 1/2 top plate spacer since my lean was 1" difference. Still satisfied. Now time for some wheels and tires! Thinking of TRD pro wheels...

less than 150 miles on the coils. swapped them out for toytec superflexes

Swapped the Moog fj for the toytec superflex today. I still have a 1" difference on the driverside lean. I'm going to adjust the front to 1.75" to level out the car. I'm also going swap the driver/passenger coil to see if it'll fix the lean. If the swap doesn't work I'm going to install a toytec...

Got my Toytec superflex and top plate 1/4 spacer in today. Toytec was very helpful in helping me order these. Going to take out the Moog FJ coils this weekend and put the toytecs on. Hopefully it will get rid of my driverside lean. Maybe I wont have to use the spacer haha. Toytec superflex vs...

I am thinking the cause of the driver side lean to be 1" is due to the passenger Rears not sitting correctly. I would advise against buying Moog FJ coils if you don't want to mod the rears to get it seated. That being said.. I went back to the drawing board and ordered the Toytec Superflex rear...

I installed the Moog fj coils 4x4 in the rears and i'm looking for someone to help me get them seated correctly. Either by brute force or cutting the 1/2" off the coils. I will pay you labor and a 18 pack

They're set to .85". It's about a .8" difference from front driver to passenger with a full tank of gas. I'm going to ride it out and see what it is when the tank is 1/4. I ordered a 1/4 toytec spacer I'm gonna throw on eventually.

Right now I have about a .9" front Driver side lean with full tank of gas 23 gal. I was wondering what the best option to correct the lean? bilstein 5100 .85" + Moog 4x4 FJ coils all around Toytec 1/4 spacer or the 1/2 spacer? Can I use the OME trim packer with the moog coils?

Does anyone have a driver side lean after installing the MOOG FJ coils + bilsteins 5100? mine leans about 1" in the front driver side and .5 in the rear.

Did you do anything to fix the lean? mine leans about 1" in the front driver and .5 in the rear.

I've noticed some driver side sag after installing the 5100 with Moog FJ coils. Its about 1 inch difference. Did anyone use a spacer to fix the sag?

I cleaned my throttle body today after 263k miles. BOY the engine runs so smoothly now. It idles better than before. Not sure if its saved MPG or worse.

How much for driver side sun shade? Tan interior

Just installed the Bilsteins 5100 + FJ coils. adjusted to .85" Need new rims & tires next! can i get a recommendation for some bronze rims?