Recent content by InvaderTrax

x2 so you can have them connected on the street and disconnected offroad for more travel

I'm wondering it it might be easier to snag one off a Pathfinder or Rodeo. Similar size vehicles with the same hub size

Depends on where you go and what you need done. A completely new exhaust with a new cat can easily cost $500

All the websites show different part numbers between 4Runner/pickup and Tacoma leaf springs, but what exactly is different? Are they more or less swappable? Or completely different (length across, etc)?

What kind of problems are you having? It's hard to say if it'll help you if we don't know what's wrong

I believe they say "50 PSI MAX" If you open your driver side door you'll see a sticker with the recommended tire pressure

Do you really need more than 40 PSI? Many offroad situations require lowering your tire pressure

Well, I pulled it apart and the stock shocks were at full extension when the truck was on the ground. Picked up some Rough Country 8000 shocks for $130 and now it rides pretty well and has lots of travel. Need to get some ball joint spacers for the front. The torsion bars are cranked way up and...

My 22RE has 214k, and was rebuilt at 202k. The Sonoma I traded for it had 278k on the original 4.3L V6 and still ran great

Well it looks like it has a 3" body lift, and 3" suspension. Not sure what's done with the front, but the rear is on 3" blocks. I took it down to the base of the yard to see how bad the articulation is, and the rear wheel picked right up off the ground. I've already gone out and picked up some...

Now, this is in no way my first vehicle, truck, project, or Toyota, but it is my first 4Runner, and my first offroader. Gotta go over everything tomorrow, but what I do know is it's an '86 with roughly a 5" lift on 35" Baja Claw Radials. 5 speed manual with a rebuilt 22RE that runs great. It was...