Recent content by ixcocoyxi

So I changed the fuel injector on the #2 (the second from the front) and the problem still exists. Going to do a compression test and see how that goes. Hopefully it's not bad.

Okay. I think I replaced the right one if it starts off 1 at the front. LOL! I'll keep you guys posted if the CEL reappears.

Hello all! I'm not new to forums but I'm trying to find out the cylinder numbers. I'm having a misfire on cyl 2 and usually the problem would be the fuel injector. I replaced the spark plugs and swapped the coil packs and the CEL stayed on cyl 2. I just need to know which one is 2. LOL! I even...

i had an 88 yota pickup 2wd back in the day. OG 22R with over 400k with no rebuild. miss that mini truck. another even more rare was the 22RET. ive only seen 1 in person. i was on customtacos and toyotanation. same sn there too

update: i ran outside after looking at diagrams and hooked up the trunk. now the trunk alarms as its supposed to but still having the 3 chirps when armed. any insights??

ive installed a few alarms in my time and the easiest way i found to install a new alarm is when replacing the old one because you could just track wires and label them according to the old setup. well, ive labeled all the neccesary wires on the car side from the info from the old alarm and...

i picked it up for free from a coworker because he was selling his old car and took everything out. wanted to hook it up but it looks like i dont really need it i guess.

great scott!! i dont have anything to generate the 1.21 gigawatts i need :( i just want my bass to hit without my lights dimming ad radio shutting off.

i was replacing the drivers side oem power lock actuator and i forgot i replaced the front speaers with a 5.5" boston acoustic. maybe ill throw those in the back ad replace the fronts with something that fits.

picked up a used power cap for my amp and it said on the cap to charge before install. so how do you do it? ive read to hook it up to a battery with a light and let the light dim down. can i just use speaker wire? diagram described looked somewhat like this from my knowledge of electrical...

its not that difficult. took me about 30 minutes to take out and replace. including the door panel.

maybe ill just get some hq speakers for the front doors and seperate flush-mount tweeters since i dont have the oem ones.

so 5.25 shallow mount decent quality speakers in the rear? its the wife's car so she wouldnt need so much bass. but when i drive in it, i want the sound quality to be good.

i want to replace the rears with as little modification as possible. and it seems like the resistor/capacitor would be the easiest. i dont have metal shears but i do have a dremel. that might make it for some quick trimming for a bigger speaker. would the window hit the magnet if i went with...

ughh.. maybe i wont change out the rears then. haha!!