Recent content by JdMeF9SiR2

Just wanted to share this photo with you guys (courtesy of Cochrane Toyota): This is the matte bronze finish of the FN Wheels ƒ(x) Pro (shown with OEM center caps in place of the included plain center caps - OEM caps not included).

2chains - You're very welcome! Our semi-matte gunmetal grey finish is slightly lighter than Magnetic Grey Metallic (MGM) paint. This finish is not, however, glossy. It is a semi-matte (satin) finish. It's not a full flat (think charcoal), but rather a semi-flat/semi-matte finish that has a...

Hi Matt Hightower - I was finally able to get that weight for you from one of my Toyota contacts. Per my contact - a factory 20x7" 4Runner Limited wheel is approximately 37lbs w/o tire, and 72 lbs with a 245/60R20 Yokohama OEM (used) tire. These numbers should be considered accurate +/- 1lbs...

Hi Neauxla - I have asked some of my Toyota dealership customers if they can help me out with photos of our matte gunmetal FN Wheels ƒ(x) Pro wheels on MGM 4Runners. If I can come up with some from them (or otherwise as soon as possible) I will post them for you. In the mean time, I just...

I don't yet (unfortunately). This is still a very new wheel for us, so we don't have a complete photo gallery yet. Generally speaking you can't go wrong with bronze on black. Just about any color goes well with black. If I'm able to get a hold of a local 4Runner in black I will try to install...

Formidable - Thanks for your feedback. We do offer two 17" models with negative offsets : 17x8" / -10mm offset Konig Countersteer Type X and the 17x8.5" / -6mm FN Wheels Five Star. These wheels push the wheels out approximately 1.25" and 1.3" (per corner) respectively when compared to an OEM...

The 17x8" / 0mm offset / 6x139.7 FN Wheels FX Pro is 23.9 lbs per wheel. The latest 17x7" / +4mm offset / 6x139.7 TRD Pro wheel that I have weighed is 25.9lbs per wheel.* Factory 17x7.5" wheels are approximately 27+ lbs per wheel. I don't have an accurate weight for the factory 20x7" wheel...

We're definitely working on adding the new wheels to our website. Frankly we've been selling out of the new wheels so quickly that we often sell out before we can update the site, so we've held off on updating the site for now. We do have a 17x8.5" Five Star available now that we developed at...

Thank you all for the orders, kind words, and compliments! To answer the questions and comments from some members who've asked / commented on the cap for the 17x8" FN Wheels ƒ(x) Pro: We use a flat cap for a few reasons. We feel that a flush mounted, flat center cap gives the wheel a...

Thanks for showing interest in our wheels. The benefit (as we see it) to going with our wheel would be: Our wheel weighs less than the OEM wheel, while maintaining a 955KG (2,100lbs) load rating and is rated / tested with a 285/70R17 tire to achieve this load rating. Our wheel comes in an 8"...

Thanks again Brian! It was great meeting you guys, and I am looking forward to seeing your 4Runner once you've installed your new wheels.

You're very welcome! I would go with the dark gunmetal (first choice) or matte black (second choice). I like a darker color on silver trucks, so you can create some contrast.