Recent content by JojoRoll

Exactly, that's why I jumped straight to the O2 Sensors today 4-Ripcord, and yes we were all correct all along. I just found the culprit when I did the oil change tonight. As it turns out the truck is Cali-Spec emissions so I looked up the diagram and it has only 1 O2 Sensor and a A/F Sensor...

There are sometimes when it smells like rotten eggs. :painkiller:

To answer your question sportscarfan, I retrieved the calculation I made on my calculator. See below: I divided the total miles driven on the trip odometer per tank by the number of gallons I used to top up (all the way until the pump automatically stops) and the result is the MPG. And I...

The CEL came up again this month, with code P0420 (same as last time). I cleared the CEL with my OBDII Scanner and see when will it come up again. Now that you mention, I should add *Check for exhaust leaks to the list. I just changed the air filter to a new aftermarket K&N filter, the truck...

LOL They are both the same, I reset both when I fuel up. One other thing I should mention, this 4Runner seems to be the California emissions spec although I'm not 100% sure.

Hello fellow 4Runner enthusiasts, I am currently having a complicated MPG issue on my 2000 4Runner Limited 3.4 V6 4WD. According to my calculations it is getting 11.19 MPG WHICH IS HORRIBLE (Same as an H2 Hummer) I got that number yesterday on my last top-up. Here are some pictures of the fuel...

I got the chance today to work on the truck and I got to do both wheels! :bravo: Before After For the passenger right side (the one that was wobbling) I managed to reduce the wobble/runout slightly enough to the point where the caliper can't rub the rotor anymore, but there still is some...

I see. I will try this out later and report back with anything else.

I didn't check it that way, for the new rotor I couldn't put it because it was rubbing with the tundra calipe because of the wobble issue.

Today in the afternoon I have decided to do the 199mm (S13WE) Tundra brake update. I started working on the right passenger side first. After taking off the stock parts and putting the Tundra PowerSlot rotor on the hub I started to have fitting issues. The rotor would rub with the caliper! I...

Same Problem Wow. Glad I'm not the only one going through this, I am currently going through the same thing with the winter weather/snow. When braking I hear the same grinding/buzzing sound in front and the brake pedal gets stiff when I step on it even when I do it slowly. It also takes longer...