Recent content by jons1133

Do the skid plates, mentioned in this thread, work with a one inch differential drop?

After hitting my head too many times, I installed new Strong Arm 4286 rear lift hatch struts. Ordered from Amazon. The rear lift hatch is very heavy and needs to be supported with a rod or a helper. After replacing the right strut, attaching the top first then struggling with the wave washer...

I needed something like that when a deer dashed into the road just west of Port Angeles WA.

Flushed the clutch fluid. Easy job, used a turkey baster to remove most of the old fluid from the clutch master cylinder and filled it with fresh brake fluid. Bled the slave cylinder, which is located on the left (drivers) side of the transmission, until ithe fluid was clear while topping off...

I flushed the brake fluid on my 99 SR5. The rear bleeder valves didn't have nipples and were clogged with trail and road muck. I sprayed them with brake clean and probed the opening. Still clogged. Opened one rear bleeder at a time and attached a line going into a large bottle and pressed the...

Air Intake Components? Phoenix Area Would you have any components of the air intake system? Previous owner installed a K&N cold intake. I want to revert to OEM. Air Cleaner System Air Duct Intake Duct Air Hoses Resonator all hardware, bolts, brackets, clamps, etc. I can remove. To fit '99...

Yep, 1999 5 speed with e-locker