Recent content by Jrdwgn

BTW on the tailgate the lines are reflections, not scratches.

These are off a 2nd generation 4runner and are located in SoCal 1. The cluster has 210,430 on it, electronic speedo. The lens has some small scuffs but no cracks or chips. I cant test it, but the rig was driving when wrecked so I assume it was functioning. $45. 2. Tailgate assembly with...

Pm sent

Late reply Make sure the window lock button is off as well.

Looking for a tan center console cover and air intake tubing between the airbox and throttle body shipped to 92620

I worried about that but as luck would have it I had a 4 hour wait for my ride from the shop and they were going after it during the time I was there to get the heads into the machine shop for a quick turn aŕound so I saw them lift the first head off, and he is sending me picture updates as they...

Well of course it was the worst, head gasket leak hiding behind the ac compressor. I found a good shop thats doing a head rebuild, gaskets, crank and cam seals, water pump, timing belt and tensioner, pcv and thermostat for $1300 so im feeling hurt but not dying from the pain. The parts are...

ITS A 95 3.0 Liter and Im dripping coolant on the passenger side front of the engine. Ive crawled all over this thing and there is just too much stuff in the way to find the source. There is no coolant in the oil, oil in the coolant, runs great, plugs are clean and no overheating. Is there a...

Im now at more than 253, 000 miles and cant really complain too much. Just a few nagging small things. But still starting up, running strong and hope to get another 100, 000 miles so went to the dealer and paid the 20 bucks, crossing my fingers. Thanks guys!

Im having problems getting this thing to seal. Its the housing where the upper radiator hose hits the block. The bottom portion is cast iron and the top is aluminum. It looks like originally there was an O-ring seal, but the dealer tells me its a liquid seal. Ive tried high temp RTV - lasted...

I know Im late to this party but I have a 95 complete tailgate in very good condition as well as a dash cluster in excellent shape. PM for prices.

Just under 250, 000 and just like it should, it fires right off, and ready to go as far as I can afford to keep feeding it dead dinosaurs.

That makes sense on a 4wd. On my 2wd it may just be redundant since there is nothing greased except inside the hub. When I cleaned the spindle with the hub removed pieces of the rubber shield / seal crumbled. It maybe redundant or over engineered but for my piece of mind I will go ahead and...

Exactly!!

More information Now I know what to look under research says its for Non-ABS front wheels. They are available on flea-bay for $30 / pair shipped and others for $23 shipped or so. That may be why others dont have that seal if they have the front ABS.