Recent content by jvisions

Sorry, I should have been more specific. It is a vibration that is felt in your butt, not the steering wheel. The vibration was enough to produce a sound anyway. I haven't solved the problem but greasing up the zerks made it much more quiet. I think it may just be a u joint, but haven't had...

And that is why it is kinda funny to me.

Haha, I had to post this cause it looks funny to me. I needed to mover my trailer so I could load some stuff in and my wife had my suburban, so I hooked up the runner. It did pretty good, better than I thought. Didn't even squish those LC springs down to bad at all. Anyway, wouldn't want to...

I have the same problem with my 2nd Gen, 1994. I have LC springs and bj spacers on it. Is the drive line the same in the 2nd gens and 3rd gens? Would my driveline have the rubber sleeve guy that was mentioned earlier? I got under there last night with a full tube of grease and gun and...

Thank you, i will check into that.

So I haven't crawled under my 94 4 runner yet to look around, but maybe one of you guys has had this problem before. I have put LC springs in the rear and 1.5" bj spacers in the front, 4" panhard drop bracket, and shocks all around. It seemed to be running good at lower speeds. Yesterday we...

Oh yeah, I had it aligned by this guy who is a nazi mechanic. Its almost like it needs a dropped pitman arm and something with the idler arm. It drives straight and things, just when it goes over bumps the front tires wobble pretty good.

The thing that bugs me still is since the ball joint spacers, my steering linkage is messed up. It seems that i need to get a dropped pitman arm and idler arm. There is a lot of play in the tires due to the linkage twisting. I don't know how to explain it really. Makes sense when I look at...

They are just the tires that were on it when I bought it, size 31 x 10.50

I bought some used LC springs from someone on the forum. They lifted the back about 3.5 inches and that is why I went with the 1.5 inch ball joint spacers. I found those from a guy in Arizona in machines parts for classic 4runners. I also had to get a 4 inch panhard drop bracket, and still...

Thanks guys, it seems to look good the more I look at it. I am a huge fan of the 2nd gens, this one is my wifes and I really am thinking I better get me one to build instead of seeing what else I can do to hers. She just wants to drive it. She found a sticker she wants to put on it that says...

I just put some land cruiser springs on the back and 1.5 in bj spacers up in the front. Trying to get rid of the notorious sag. It sits a little high in the back but I am hoping the springs settle after a bit of driving around. Thanks to this forum I was able to get the info I needed to get...

ok, thanks guys

has anyone tried this Xado product?

I will have to check that out. Thanks for the info.