Recent content by kalamen

I would like to purchase one as well. Please pm me the details. 05 v6 4wd. Thanks

It was a bad tr7. I purchased a new one, programmed it, installed it and it works like a champ. Great modification.

Looks like it is a bad tr7. I hooked everything up with the multimeter in line in between the tr7 and the relay on the blue wire. I hit the green wire twice with 12v and the led on the tr7 lights up and stays lit for 5 seconds and then goes off so I know it is programmed right but I am getting...

Thanks. I have been using a multi meter. I will try to program it again and then I will set it up to run a light bulb and test it to see if I am getting any amperage. If I don't, it looks like I will be ordering a new TR7. Thanks for the guidance.:hatsoff:

I read through the instructions, which were extremely helpful. The led in the tr7 reacts exactly as you described. I also read the instructions that came with it and they still match what you describe. I can't figure out why the blue wire won't power the window if it is hot. The relay simply...

I realized the connector supplied with the relay was bad, so I made direct connections to the relay instead. Now if I disconnect the blue wire from the tr7 to the relay and instead supply power to the post directly from the battery, it rolls up like it should. I am guessing that I still have a...

I tested the relay and that is working. I reprogrammed the pac7 and am confident that is correct. I have verified the connection to the b9-25 that I have is getting power when I press the window button on the fob and it does. The weird thing is that my blue wire on the pac7 has constant power...

Thanks Asmara. After I couldn't get it to work with the magnetic switch, I pulled that out of the equation for testing purposes by connecting the two wires that go to the magnetic switch. I do plan on adding the switch once I get it to function. I am able to insert my key and roll the window...

Correct relay? Is this the correct relay? I wired everything up, checked all connections, programmed the tr7, but I can't get the window to go back up. I never hear the relay making noise so I don't know if I have a bad one or possibly the wrong one. Thanks.