Recent content by kendrick153

Unreal generosity of your time - thanks so much. Will set aside some time to tackle this in a the next month or so. Expect a request for your venmo so I can send you beer money. Cheers.

Got it. Thanks for the follow up & clarification. Okay so I need to go with your method. Any other information / photos (?) of your fix/approach would be massively appreciated. (Sending good karma from one stranger over the internet to another).

Unlock in general or just passenger unlock switch causes back window to roll down? GOAT - appreciate all your help here. You previous post said unlocking from the passenger side = back window roll's down. I can live that no problem. But this post seems to imply unlocking the car in general...

Still Not Working Did the mod today, with the same set up you have. IT WORKS! Bent the Fog Relay Prong up, jumped a wire to left side of Tail Light Fuse. So left side has both the 10A Tail Light fuse and the jumped wire sandwiched in there. I cut the green/black wire in the DRL module and...

GTR Ultra 2 LEDs - How are they? Dig the build and the pictures. Those GTR Ultra 2 LEDs - How are they? Eager to do this same upgrade, but haven't found definitive info on if they work well with the OEM reflective housings. How's the cut off? Ever get flashed by oncoming traffic? Install...

Rear Hatch Lighting Willing to do a write up (or point me in the right direction) regarding the Rear Hatch light? Love the build so far. Looks fresh.

Perfect. Appreciate the response and piece of mind.

Water coming out of a metal spout on the lower passenger side of the engine bay that appears to be originating from the passenger side firewall at a solid drip. Maybe its water from the AC Condenser? Checked my coolant, haven't lost any ( and I tasted the water....def not coolant). Didn't see...

Read that the 881s are a hair stiffer, wanted to go for more comfort. The springs I got were about $220 each. Sure you might save a couple hundred bucks, but I justify it by saying that's just 4 tanks of gas.

1st clip. Probably should have gone second clip, but not interested in taking it all apart again at the moment.

Correct, can't find a website that would give you 5100s with TRDs (but double check Wheeler's - also go to wheeler's cause they change out tundra 5100s with a 3/4 bearing that fits our 4runners), but just buy a pair of top plates so that you can either assemble yourself or have a shop do it...

I went with this setup specifically for my future plans. I've seen a lot of guys who run stock bumpers with TRD fronts and 906 backs (check out Ryance39's or Speedy's build). It looks great, even or maybe a bit of forward rake, they say the ride is great, maybe a bit squishy in the back when...

5100s all around. TRD Tundra Springs in the Front. OME 890 in the back.

Newcomer & First Projects Been looking to get a rig for myself after driving around a '70 Chevelle that has been my DD since high school. Love the car, will have it forever, but it doesn't get me to the mountains. Bought a 2002 SR5 Sport Edition in Thundercloud with 190k miles, decent...

Not an electrician. Reason for the objection and explanation of the correct way to do it? Appreciate it. Thanks.