Recent content by Kennysmoke

Yes all dome lights and door switches are working as they should.

Maybe it has something to do with the led accent lights the PO installed. I want to remove them anyway. I'll trace down the wiring and remove everything. He did have them wired to come on when vehicle starts and shut off when the key is turned off.

I just purchased a really clean '98 Limited with 126,000 miles to replace my 2000 SR5 Sport that was totaled by insurance after hitting a deer last month. As soon as you start the vehicle the doors auto lock without putting the shift lever in gear. When I shut off the truck the doors don't auto...

What headlights do you have? I just bought a '98 Limited with the horrible stock headlights. I need to find a replacement

New to me '98 Limited Just picked up this super clean '98 Limited.

I have a Federal Emissions single CAT. It's not a CARB compliant emissions rig with two CATS. I just want a bolt on OEM style not a cut and weld type. Thanks though. I was hoping someone who's replaced one will chime in on a good brand to buy. I'm seeing Boscal,BRE, Walker...

Probably but I'd have to remove it to fix it because the hole is on the top and with 194,000 living in the rust belt I've got no idea what the rest of it is like. And I don't own a welder or know how to weld.

The seam in my CAT on my 2000 SR5 has a hole in it. It's a Federal emissions vehicle and I live in NY. I'm looking for recommendations for a replacement. Any info is appreciated... Thanks in advance.

I need a new battery for my 98 SR5. I have a Napa, an Auto Zone and Advance Auto Parts in the area. Any suggestions for which to buy is greatly appreciated.

I tried every trick I could find online last night and finally ended up having to drill out the cylinder to get it out... there was no way to get the key to turn to accessory to depress the hold in pin to slide out the old one. My advise to anyone having an intermittent issue with key not...

Today at work while climbing down a ladder my ignition key which was hanging off my belt loop got stuck in the ladder and got bent. I was able to straighten the key. It works perfectly on the door locks but will not turn the ignition cylinder. I went and had a new key cut from the original and...

I finally got around to buying the nuts and o2 gasket for the upstream sensor, I don't know if I've got an aftermarket cat or something but 8x 1.25 nuts will not thread on. Studs are in very good shape. the nut barely gets started and stops as soon as the whole thickness of the nut gets below...

Thanks... that's too bad... if anything I'd want to go wider... the wheels were mint too... oh well the search continues

I found a set of wheels and tires from a 2007 4Runner but the offset is 30mm instead of 15mm like the stock wheels on it. I don't understand anything about offset. Does going from 15mm to 30mm make the stance wider or narrower?