Recent content by krunner53

After some more research... It looks like the 4.0 does not have a fan pulley bracket. It does connect to the water pump. Can anyone confirm? Thank you!

Hey All Happy Holidays, I'm hoping this isn't the water pump as it was replaced about 20,000 miles ago. I am having some engine noise up front and I grabbed the radiator fan yesterday when searching and the whole Clutch Fan Pulley "assembly" wobbles. Can anyone tell me if I am looking at...

Thanks! Thanks! After a couple hours searching last night I did find the Toyota120 link but I didn't see the other one. I will take a look. I'm going to tackle this. I'm going to soak everything in Some PB Blaster a couple times before I actually do it. Should I avoid getting PB Blaster anywhere?

Thanks Thanks for the info. I've done quite a few searches but haven't come up with anything for the 4th gen. I went to get an alignment after changing out the wheels and they told me my inner tie rod ends and LBJ were too warn to do it. I've got the TREs ready to swap out. Now just tryinh to...

I'm looking to dig in and replace my LBJ, ITRE,& OTRE but can find a write-up or info in the 4th gen.( looks different than the 3rd gen. writ-ups) I'm mainly concerned about the LBJ. I got the Haynes manual but it doesn't show it because when it was written you had to buy the whole LCA to get a...

265/70/R18 fit with a 3/2 lift Sorry if this has been asked I just cannot find the definitive answer. Will 265/70/R18 fit without rubbing on stock rims? with the OME/Toytec 3 inch lift? Or will I have to throw them on and see? Thanks

I've got the same thing going on I was also thinking dieseling..Would running seafoam through the gas tank work? and/or seafoaming the engine?

Thanks to the OP Thanks this is great info!

Great write-up This looks like very simple maintenance to do to my new to me 06 runner! Thanks!

Nice Looks great and easy.. I was thinking about doing this. I like the flat black

Thanks for the write up. I'll have to do this when it warms up. What other standard maintenance did you do when you bought your runner?

Thanks for the write up and pictures! I'm in the middle of radiator swap and ans nicked the belt with a sharp edge.... dumb mistake that cote me $35

wnelax04sr5 Nice build. Thanks for the write up on the radiator swap. If I'm going to swapp out the radiator do you suggest I add the tranny cooler?

Thankfully a new gas cap and taking the battery cable off worked for me. I have been 1 week with out any Christmas lights. knock on wood...