Recent content by Kyle7372

  1. Kyle7372

    Lift and Tire Central (pics)... Post 'em Up!

    After a year of the Toytech/Bilstein 3" Lift installed I finally got my TRD Pro Wheels in black and wrapped them with some 285/70/17 KO2's. [/url]IMG-0328 by Kyle7372, on Flickr[/img] All I had to do is push the liners forward and remove the front muds, no rubbing.
  2. Kyle7372

    2008 4Runner V8 Engine Noise

    Thanks for the input guys!
  3. Kyle7372

    2008 4Runner V8 Engine Noise

    bump
  4. Kyle7372

    2008 4Runner V8 Engine Noise

    Ever since I changed my timing belt and such I have been super paranoid about any abnormal sounds or ticks from my engine. This noise has been bothering me and after searching I still feel paranoid ;( I am pretty sure the ticking is from the fuel injectors but I would like some input as to...
  5. Kyle7372

    Evaporator Replacement

    Almost forgot. when you have gauges on look at the suction pressure. If the pressure and temperature is fairly stable then the expansion valve is working just fine. Even though you are charging it with the factory charge make sure you have a good superheat. (actual suction line temp -...
  6. Kyle7372

    Evaporator Replacement

    All your refrigerant oil should still remain in the system once you recover or release the 134A. Just make sure you check all your fittings and change the shrader cores. Most places leaks are found are around the shaft seal of the compressor so before you pull the refer out get some dawn and do...
  7. Kyle7372

    Kyle7372 Build

  8. Kyle7372

    Kyle7372 Build

    Added a K&N filter and weather tech floor mats today along with a good clay bar and polish. Today I learned that I must buy a polisher because it is exhausting doing it by hand.
  9. Kyle7372

    Kyle7372 Build

    I agree with you about the center caps! I did removed them a couple days ago. Also, my tires are brand new so I will get my use out of them and probably throw on some 17's and sell these wheels off since their a bit big imo. As for the sliders, I know I want some and now that you mention...
  10. Kyle7372

    Kyle7372 Build

    Curious if any limited owner has removed the factory running boards and installed sliders while incorporating the lights that were on the factory boards. Thought this could be a cool mod for limited owners. Let me know what y'all think.
  11. Kyle7372

    Kyle7372 Build

    Finally after a year with driving my wife's old 2000 2WD Sr5 4runner I picked up a 2008 Limited 4WD Runner. My love for 4Runner started with the old 2000 Sr5. I begin reviewing this thread and learning about overland builds and different trim levels of the 4Runner. I will say that I was hooked...
  12. Kyle7372

    WTB or Trade for a 4x4 3rd Gen

    Black with grey interior. 165000 miles. New tires, brakes and rear shocks. Sunroof and double din iPod ready head unit.
  13. Kyle7372

    WTB or Trade for a 4x4 3rd Gen

    Im looking to buy a clean well taken care of 4x4 3rd gen. I have a 2000 SR5 2WD I can also trade if one is interested.

Members online

Forum statistics

Threads
278,309
Messages
3,554,068
Members
248,016
Latest member
Advally Service
Back
Top