Recent content by LedFloyd900

Sorry I meant the one wire (believe the P/N is 83420). When I pulled the engine apart it had a resistor in the line for some reason and I left it off when I put it all back together but I just recently added it back in the line but no difference. I don't think I have a two wire one but it's been...

Well both, the longer it sits the longer it takes to start. If it sits for 8 hours it's harder to start than if it sits for 4 but not as hard if it sits for a day. And I know older cars take longer to start sometimes but this isn't that, this is obviously something wrong. I mean it almost...

I've got a '92 3.0L 4x4 that is on and off used as a daily driver. I completely rebuilt the engine myself (I'm an aircraft mechanic so I'm not just a backyard joe-schmoe) but now it takes FOREVER to start. And it gets worse as the temperature drops or if it sits for a longer period of time. I've...

Recently discovered my rear end in my '92 V6 4x4 is going out...nice grinding and growling noise. Now forgive me if this is a stupid question, but how do I know what ratio I have? It's mostly an off roader so I'll be getting one from a salvage instead of spending $760 for a rebuild. For some...

Well yea I've annealed all the crush washers so nothing is leaking, and it only has troubles starting after sitting for a while like over night or at work. The longer it sits the longer it takes for it to start

No they're upgraded. The engine was rebuilt by a bunch of f*cking idiots and ran for about 800 miles before a rod started knocking and I then rebuilt it myself. For that 800 miles it always started perfect and ran fine. I doubt it matters but I did soak the injector part of my cold start valve...

I just rebuilt my 3VZE and it runs great, I ported and polished everything and it's bored .020" over and just runs great, however after sitting over night or at work all day i try to start it and it just cranks and cranks like it's not getting fuel. I can pump the gas a little like its...

You SHOULD be fine getting 32's (correct me if I'm wrong), my runner has either 4.56's or 4.88's, not really sure but either way it doesn't hurt it a bit. Mine came stock with 31x10.50's and it looked pretty decent, you can look at my pictures and judge for yourself tho to determine if that's...

Yea they're 32x11.50r15's on the stock wheels, no lift or modding to pinch weld or anything. Fit real nice

No lift, all new shocks with moog coils in rear, and 32x11.50r15's on the stock wheels (15x8")

No, there's just no weight in the front due to no engine

Yea I just put new male and female connectors on it, easy fix!

Well after a closer look I may be able to just put a new connector on my harness wire pretty easy, but I'll let you know for sure. I appreciate it

I couldn't get the whole wire so I just cut the connections off and was going to get some new wire and basically make a new one but if you have the whole wire that'd be even better

Sorry, forgot to specify the engine. It's a 3VZE. Gonna run by salvage yard today and see if I can get another one to just splice in to my harness