Recent content by mtnkid85

Dang, sorry to hear about that low comp on 6. Yep, do a leak down test to put your mind at ease and we will hope its in the valve train.

Woohoo! Nice job

I did finally get the correct set of injectors working. The correct injectors are the 23250-46030 supra injectors. Now the AEM fic6 runs them perfectly, much happier now.

Did you ever order these rock auto boots? Did the inners fit well? Im putting together a order through them and need to reboot my cvs too.

Did you ever order these rock auto boots? Did the inners fit well? Im putting together a order through them and need to reboot my cvs too.

Well after getting the truck running somewhat nicely on the stock injectors I am now trying to run the 305cc green 7mge Supra injectors (pn23250-70080) And I am having issues. The truck is running WAY rich, it will start and barely idle but after startup the afrs immediately plummet to ~10.4...

With the 10k resistor in place the truck won't come out of Open loop mode because its not picking up the O2 sensor. Even with the bypass harness in place of the FIC6, it won't come out of open loop.

Sorry its a 99 Tacoma. Its a narrow band O2.

It doesn't seem like this thread is real active but Ill update it anyway. After receiving the URD patch harness and making my connections again, I found several mistakes that I had made from my first attempt. I got confused only following MTDs chart and after looking closer at AEMs directions...

Well, after realizing that I was experiencing several different issues that traced back to my DIY jumper harness and the pins in the female plug I said F it and ordered the stupid URD Type C jumper harness.

edit

I must of had it typed incorrectly because your code is the same as LF1 in the link I posted and now it WORKS! Anyway thanks for posting.

Alright guys, I am working on getting my 1999 Tacoma with stock supercharger setup with this AEM FIC/6. Ive set it all up using MTDs awesome write up and have gotten everything plugged in and am having some issues. I made my own jumper harness and Ive double checked that everything is placed...

Thanks Phatty, I think Ive tried that one, it is "LF1" from the scan gauge list, but Ill input it again to verify. I know your name of "LT%" is different from what I was inputting, maybe that has a bearing it?

Bumping this really old thread to see if anyone can get there fuel trims to read with the current x gauge commands? I am trying to get mine to come up for my 99 Tacoma, but only the stft for banks 1&3 are working. Im needing to view my long term trims to tune my AEM fic6. Thanks,