Recent content by naloboy

  1. naloboy

    What Did You Do To Your 3rd Gen Today?

    Finally some ok weather here in the Vancouver-ish area of Washington so I finally got around to doing the Tundra brake upgrade, garage has too much junk in it so I work in the driveway. And here is my cost break down : Junk yard calipers off a '05 Tundra - $45 each Napa rotors - $50 each Napa...
  2. naloboy

    What Did You Do To Your 3rd Gen Today?

    Cleaned up the Tundra calipers I bought from the wrecking yard. Now they are a Ford Engine Blue. Waiting for them to fully dry then time to put them on. Thinking about getting pads and rotors from Napa
  3. naloboy

    What Did You Do To Your 3rd Gen Today?

    Replaced passenger front brake hose and brake line to caliper. Sucked to find out I needed it replaced in rush hour traffic. :wtf: Luckily I had some vice grips to keep it from leaking till I could get parts for it today.
  4. naloboy

    6X9s in my 99 ?

    Since this is a year specific question I thought I'd post here instead of in the Audio section. Sorry if this should be in the other section. If it does maybe a mod can move it. Anyone try mounting 6X9s in their rear doors ? I used to have these in my 87 but they were mounted to the roll bar...
  5. naloboy

    '99 SR5 Audio Install With Q-Form

    Ah so those 2 together is like having the DEX-P1R but with power outs ? Sweet ! I still need to get me some amps to run my DEX-P1R again. Sold the amps with the 87 4runner but I took the deck out. But my 99 had a AVIC-U310BT in it when I bought it so I'm in no big rush to get my good deck in.
  6. naloboy

    where did you mount your scangauge? (pics request)

    That's where I mounted my SCII. Sent the wire right above the vent through the plastic of the console. And being in the Pac NW myself, we RARELY use the vents. It's usually the defrosters ;):
  7. naloboy

    Anyone know what types of rims these are ?

    Thanks Pitbull. And now I know :hatsoff:
  8. naloboy

    Anyone know what types of rims these are ?

    I think they are upgraded Toyota rims since they are 16s and stock the 4runners came with 15s. My friend insists they are after market rims. And according to the dealer sticker, that I found in the glove box when I bought this, the original owner bought the 16s from Toyota
  9. naloboy

    Scanguage: Worth it?

    Exactly what Millerad said. I have a '99 and have the Scangauge instead of the Ultragauge because of the added bonus of the trans temp sensor. If you don't need it or don't want it, get the Ultragauge and save a few bucks
  10. naloboy

    Plug in LED vs Whole taillight LED

    Didn't see a post making a comparison but has anyone compared replacing the stock tail light bulbs with LED bulbs vs replacing the whole tail light with a LED set up like DEPO? I was wondering if there was a difference between the 2 in over all light increase or are they same because it's still...
  11. naloboy

    Portland oregon

    Being a truck driver, I usually deal with Radio Man. Usually hear him on the radio driving on 84 when you are around the Flying J and the T/A. He lives not far from there and I've bought a couple radios and other things from him. I have his card someplace with his phone number on it. I'll...
  12. naloboy

    Shifting

    Is your check engine light coming on ? My 99 started to do that then threw out a faulty TPS code. Put an ohm meter to it and it was still in spec but a friend had an extra TPS so I put it in to test it. Still threw out the code so I put my old one back in and after my next fill up, no check...
  13. naloboy

    Seattle Area Maintenance and Meet

    @Hepar Weather on eastside is AWESOME ! It was 75 in Waterville today and it's 60 right now in Spokane. I drive a semi M - F and go back and forth across the passes between Idaho and Seattle. And that baby shower wouldn't happen to be in Spanaway would it ? I'm going to one on Sat
  14. naloboy

    Seattle Area Maintenance and Meet

    Damn I was hoping to get that :sobbing:
  15. naloboy

    What Did You Do To Your 3rd Gen Today?

    Wasted $55. Got a CEL, checked the codes and it said P0120. Ok so checked TPS and the ohms seemed to be off. Bought new TPS and installed. Cleared codes and about 1/4 mile from home...CEL came on again. Same P0120 code. :wtf:

Members online

No members online now.

Forum statistics

Threads
278,312
Messages
3,554,083
Members
248,016
Latest member
Advally Service
Back
Top