Recent content by Offcamber

Thanks. That does help. I also prefer to DIY. It's a better learning experience and the extra time it takes to me to research each aspect of a project allows me to keep avoiding my "Honey Do" list. I read the homebrew scene is a potential source for tanks, so I'll look into that further.

Tell me about your nitrogen set up. It's finally time for me to put something together. It looks like most kits (regulator, hose, chuck) are around $200 or so. Is that a good way to go or gather the parts myself?

Did you permanently ditch the swing out arms in favor of keeping the spare under the platform?

I will also confirm which type of grease I used. I'm a big fan of Superlube, but I often try to use a high-temp bearing or marine grease where there may be water ingress. I'll double-check what I used in this case.

I've been running the Whiteline bushings in my OE LCAs for over two years. I don't recall ever testing the cam bolts in the bushing before installation, so I can't say for certain that I did or didn't have any play. Either way, I haven't had any issues that I'm aware of with movement of the...

I'm very interested in how this turns out. Adding a rear sway bar setup has been on my To-Do list for a long time. I looked into some possible options awhile back, but never followed through. I really wanted to run the torsion bar through the frame to tuck it up under the truck as much as...

To clarify, you still don't have everything working correctly with the VSC device wired per the instructions (or otherwise)? Does it look like the latest version is malfunctioning? I have the revised device sitting on the shelf waiting to be installed. Maybe I should hold off until there is...

Come on now. Can't you north county boys play nicely in the sandbox? :lol:

Yes, once the hood is released, the grill is still recessed below the top plate of the bumper. I don't know what the dimensions are of the 03-05 grill (shorter?), but I doubt I'd feel motivated enough to swap the grill. I didn't find that there was a wide range of adjustment to manage gaps on...

I have an '06 and the top plate of my bumper has a cutout that looks like what you did with yours. I don't have a transmission cooler, so I can't speak to that issue, but I do recall needing to massage the AC lines a bit to provide clearance for the bumper and later for my winch. I access the...

The SRQ 3rd gen also retired.

Tracking is showing Retired.

That's likely the gate for the conservation area. You have to pass through the protected space to get to the BLM land that is adjacent to the park boundary. I wonder if they temporarily (or permanently?) closed the access gate. There has been a problem with illegal camping for a few years...

I was kidding. I figured with less than a month to go there might be additional details emerging. As much as I like "people and parts" pics, I'd really like to read (or see) more about how the rig is being built to race at KOH. I'll try to remain patient, though. I certainly don't want to turn...

IFS portal boxes! I knew it!!!!