Recent content by PAPA

By hand or with the DA? What pad? How many section passes? What speed?

STOP If the scratches are deep enough that you can catch a finger nail on them wet sanding may have been needed. However I have found that a quality compound and then a polish may get the job done. Always try the least aggressive method first. Are you using a dual action polisher and various...

few pictures from tire day.... 05 limited V8 no lift stock. I went with P265 70 17 GY Silent Armor Oh yeah, the white stuff on it, that is road salt.... Old New Side by side Side by Side At full lock front no rub Checked out the CV boots while I was under there. Passenger side Driver...

I can not tell ya' if from 4wd. However counting coils leads me to believe the one the left is the drivers side.

Thanks for the help.

For clarity I am consolidating a couple of user questions and am looking for feedback and hopefully answers from a Toytec rep. These are quotes from other threads. Hope fully you can get the drift of the conversation.

Like you were I am confused. I'd like a definitive answer and am still not satisfied as to the facts.:shrug: The part # appears to be the same for the spring 112620 This is what the website says about this spring: "05-10 Tacoma 03-10 4Runner and FJ 1.6" lift" Toytec/Eibach front coil lift...

Are you certain that the front suspension can not be set lower with this kit? My understanding is that the springs alone give 1.6" of lift. Therefore the "adjustable" shock perch is providing 1.5" of lift at its pre-set height. I hear that it is "pre-set" to give 3"of lift. I do not think that...

Yeah and I bought a new leaf blower..... not working out so well. Leaves are still dropping....Fall leaves are nice when on the trees but ughh when they hit the ground.

Must be in neutral before you turn the switch. Try letting it roll a bit....

I am thinking...

could also be an alignment issue, I am thinking toe. Ackermann steering geometry - Wikipedia, the free encyclopedia or http://www.youtube.com/watch?v=oYMMdjbmQXc

Mine failed, and fell. I re-installed the original heat shield using large fender washers and original hardware. No issues, problem solved

I could be wrong but my understanding is that the only difference is in how the front shocks adjust. Ultimate has a screw adjustment similar to a coil-over and these shocks utilize c clips to adjust. :shrug: Performance wise I cant imagine much difference other than adjust-ability?

"Starting now through the 23rd, the TTHA-CK-RCC Bilstein/Toytec kit will be on sale! " Original post was on 9/20 sounded like it was a three day sale...IJS