I have a 95 3.0L. The rear was sagging so I installed some Procomp springs. I got about 3.5 inches of lift but the whole rear end seems to have shifted 1 inch toward the passanger side. Also when driving an intermittent grinding noise presents. I have checked my coil spring installation and the...
Could be a vacuum line leak. While the engine is running, spray a little starter or brake cleaner around the vacuum hoses and see if that revs up your motor. If so, you have some lines that need replaced and your problem is solved. Just vacuum issues.
This happened to me on my 92 but I had the light come on. When I ran the code it was shift solenoid #2. Not a difficult fix. I could order the solenoid for $90 or for $130 I could buy all three. I bought three and installed all new. The code was correct. #2 was not functioning. Good Luck
