Recent content by RaptorRunner

FS: Goodyear Wrangler DuraTrac tires size LT 265/70-17 load range C Three are at 13/32" tread depth (over 70% remaining) One has never been used (mounted as a spare) I will throw in a fifth tire for free which has a small cut on the sidewall. It has no issues holding pressure so it probably...

I bought the 2014-2015 kit for my 2010. For an extra $1.20, you get one extra festoon and four extra T10s. The 2010-2013 kit only comes with two extra bulbs. The bulbs in both kits are identical except the 2014+ has two extra T10s for the side mirror puddle lights. I figured I could use the...

Cost was the primary reason. $30 (with a coupon) for spacers vs $215+shipping for the SAW coils. I decided to wait on upgrading the stock coils when I get metal bumpers. Cost references: Daystar Part KT09127BK - ComfortRide 1.5 Inch Rear Leveling Kit - 4 Wheel Parts Sway-A-Way 1.5" Lift Rear...

Glad you got it figured out. I doubt anything was damaged beyond cosmetic blemishes on the coils. I've put 10,000 miles on mine (part of which was a cross-country move with a large trailer through the Rockies) after installing the cups backwards the first time. If anything on mine fails, you'll...

If the spring cups are installed correctly, you may just need to reindex the coils i.e. twist it until it doesn't contact the UCA at full droop. Also, check out this thread: http://www.toyota-4runner.org/5th-gen-t4rs/170150-springs-rubbing-since-lift.html

I don't mean to sound like an ass, but you didn't search hard enough. Fortunately, I saved all the posts that I used to help narrow my decision. I ended up with 2.5 front and 1.5 spacers in the rear. Hope these help! Good luck on your decision. My 4Runner Lift Recommendations | The Black &...

Sounds like you installed the spring cup backwards. Did a quick Google image search... WRONG: Source: http://www.toyota-4runner.org/4th-gen-t4rs/86233-zachattacks-build-thread-2004-sport-edition-7.html Correct:

Since I've been in your shoes, I'm going to save you the trouble in searching and reading a ton of posts to find the metaphorical needle in a haystack. Short answer: You're likely going to rub at full lock. Try it! Worse case, you can take the spacers off if the rubbing bugs you too much. I...

shufly09 ... probably the fastest built rig that I've ever seen.

I'm up to help along with Greedy and will be free the next three weekends unless someone wants to plan another wheelin' trip. I've got jack stands, floor jack, and some tools if you need them. We would need to get a torque wrench, 1/2" wrench, large socket set, and a breaker bar. Having an...

Nah. I took it off after it was bent from driving in the water. Even though I ended up with some scars, I still had a blast going on my first trail in WA. Here are some of the photos I took from the trip.

I'm a go for Tahuya next weekend! Since tires were mentioned, I found a set of 285 Duratracs for $475 in Renton Highlands on Craigslist if anybody is interested. I'm tempted to get them, but I'm not sure that I want to deal rubbing issues again. With that said, if anybody is interested in my...

I'm just going to leave this here... Petersen?s 4-Wheel & Off-Road Names 2015 Toyota 4Runner TRD Pro 4×4 of the Year

Dallas

Count me in for Saturday! I just moved here less than a month ago from Texas. Towed a fully loaded Uhaul trailer with my T4R through the Rockies. It was quite an experience.