Recent content by rlarroque

Lol I know, I would have been ok if it was just the exhaust

Mine were loose because the shop that did the spindle gussets didn’t tighten the bolts to proper torque. Disappointing, but shit happens.

Found the noise, loose bolts on the spindle.

Chemical guys bare bones is a good way to protect them. I spray them every car wash after wheeling or the beach.

I thought this was only when going from drive to reverse or the other way around. I’m not applying the brakes at all in this instance. Just rolling to a stop. You haven’t had any issues with it since it started happening? I’m about to drive across to country so I’m trying to make sure...

Yah that has been done that’s what I initially thought it was as well because I had an alignment done. It was all torqued properly.

So I have a weird popping noise and I was wondering if any of you ever encountered anything like this. It’s a few consecutive popping noises usually when I slow down sometimes when I am driving. Everything is torqued down to spec and everything is greased / lubed appropriately. Thanks in...

No issues balancing I haven't had any issues balancing the tires and I have the E load version of these. They didn't have C when I made my purchase. Every place I go to has been able to balance the tires with no problem at all.

With what we're setup with from the start, any brand will help tremendously. I used dynamat. The speakers will sound a little better and you will knock out a good amount of road noise. I say go for it.

DM'd you on IG with an image of them. Evan handed them to me separately they weren't wrapped up in the bumper.

Yah for sure Lawndart mentioned that we should ask to see if he can make them out of steel for that reason. I'm also missing the actual spindle unless it's already on the bumper. I haven't had a chance to unwrap anything. Which is why I'm looking for the guide to confirm what I have and don't...

It's more so I can make sure I have all of the parts. I have most of it, but Jerry from BAMF mentioned there was some stuff they couldn't find in the warehouse and wanted me to double check that I wasn't missing anything else.

I have almost all of it. I'm missing some of the spindle assembly stuff and BAMF is going to help get that all situated. I just need a guide to make sure I'm not missing anything else.

We chatted through IG he doesn't have one since his is the one the guide was based off of. He did give me a heads up on a couple of things for the install which was awesome of him to do.

Yah same thing my bumpers had my name on it waiting for me to come in for install. Did you get all of your parts? Jerry mentioned that the spindle stuff was missing and he was going to contact a machine shop about creating them. I'll PM you my email. I just want to go through and make sure I'm...