Recent content by S2KT4R3

This is all I could find for pictures while I was making it. Once the pvc is cut, I used some screws to keep all three together. Then from there, I screwed that pvc "assembly" to the console where I had used a dremel to make room for it to slide in. Keep the depth of your gauges in mind because...

I actually didn’t take too many photos while making this but I’ll see what I have. I basically just followed some DIY’s on fiberglass sub enclosures. Purchased a piece of 2” pvc from Lowe’s that gave me a good starting point since they fit the gauges perfect. Some cutting in my spare console I...

Triple gauge set up I've slowly been working on for the center console:

Haven't updated for awhile... Re-geared diffs to 4.88s. Got the rear installed and wired up, still need some time to get front diff installed. Wiring was pretty straight forward with all the write-ups on T4R and Timmy the Toolmans youtube videos. Couldn't find anyone that has added the RR...

Thanks, the guy that welded it on for me just suggested that he could do it so I figured what the heck might as well since they're off. I'm hoping to get time away from work to get it up in the mountains soon.

When looking at the AT2's the 295s offered more sidewall protection and slightly deeper tread than the 285's.

Picked up some Stubbs Sliders and had some extra strength welded to them:

Got around doing the ISR mod and deck plate mod:

I've had mine for only a few thousand miles but so far I'm happy with them. Went from all seasons that were on my 4runner when I bought it to the AT2's and the road noise is slightly louder but doesn't bother me. Looking forward to getting them in some snow this season to see how they do. Went...

If your close to any shops that do vinyl wraps they should have swatch books from all the different companies. Might be best to just walk in and see them in person to see what looks the closest to MSM. Ill be going to a shop that wrapped my car later this week and I'll take a glance if you don't...

It feels a lot better and firmer than the stock suspension that was on there, but to be fair it looked to be original and worn out. I looked at other setups but found this should be more than enough for me at the moment and the price was reasonable for the amount of lift you gain.

Installed lift with Toyo AT2 295/75/16 Bilstein 5100s Toytec Front Springs LC Coils Rear 1" Toytec BL

Finally got around to finishing my switchback corner lights project. I debated painting the housing black but wasnt sure how much light I would loose so for now they are still chrome. I have them wired so that when I turn on the parking light, the white comes on. I plan to wire them as a DRL...

Ah ok I guess I got confused. I've seen people on here refer to the spacers that have the studs on them call those adapters, and if they don't have the studs, then they are simply spacers. Either way looking at getting the spidertrax ones linked above :thumb:

Appreciate the links I'll check them out