Recent content by sajer

Welp further dinking around. I tried starting in P no go. Tried in R no go. Tried N and it fired. So, transmission range sensor and a buddy of mine though maybe the brake light switch?

Yep , tried my multi meter on it and it appears good. Then with it pulled I jumped the starter and it fired. Now I just went back out and messed with things again. I tried starting in park , with no go. Moved the transmission to reverse - no go. Moved the transmission to "N" and it fired up. I...

Ok, so a month or so ago I jump back into 4runner and get power but no crank , barely a slight click and nothing. Check battery and dork around with stuff and then boom it starts. Take it to mechanic because all the lights are now on and he checks the cables , hooks up scanner showing ctalytic...

Mine started happening on my 2006 Limited over the last few months. I suspected a right upper ball joint, but after replacing the ball joint and A arm the vibration is still there. Whats odd is that on the cooler mornings the vibration seems to disappear? Im taking it in next week to have the...

thanks guys I have been getting a little "clunking" noise and some vibration on steering the last month or so. I had noticed the damaged upper on the RH side and its leaked grease out pretty bad. The lowers appear pretty good and I have 140k on them. On the complete upper is there any place...

So I called a couple of online guys and they indicated the upper ball joint comes only with the arm? Is this correct? I have a right upper going out and wanted OEM based on what I have read , but cant seem to find just the upper ball joint? I was also going to to both lowers to avoid the...

As soon as the kids go off to college we will be looking to relocate south also!

Just tried the POR15 on my 2006 runner , which honestly the rust was not that bad on for northern Indiana. The front end was the worst with the skid plates showing the most rust. I debated about just tossing the skid plates and buying something new, but figured if try the POR15 first and see. I...

Well , NAPA had the front left caliper in stock , but no right. So i installed and bled brakes and so far after about a 5 mile trip no heat buildup, breaking is solid, no smell of burning, and best of all no shakin! I will see how it is on the trip to work tomorrow and next weekend I will...

Well , I pulled the left front wheel and went back over everything and inspected the pads and rotor. I then checked the pistons on the caliper and the lower inner is not retracting or expanding now. So if the lower was not putting enough pressure on the inside lower would that cause the...

First time post , long time lurker. I have 2006 limited that decided to give us trouble on a trip last month through the Appalachian mountains. Nothing like flying down a steep grade and the brakes decide to start shaking and jumping during heavy traffic. Yeah, it was awesome. So we got home...