Recent content by SDHQ OFFROAD

If anybody had a set of 2010+ 4Runner non-KDSS on order during this ordeal, please contact us.

42 pounds each. Sorry about the delayed response.

Just finished packaging a huge batch of these A-Pillars. They are ready to ship out same day!

Just finished another batch of these! Get them while they are hot off the laser!

1. 50 lbs 2. We do not because our hidden winch mount is so far tucked up. Also the OEM recovery points are welded onto the frame and easily accessible already.

We can have you measure the keypad or based off your purchase date.

We do not offer these products without our logo into them. It is all part of the same laser cutting program. It is very subtle and unless you are looking for it, most people don't even see it.

I would always recommend to test fit it prior. If it does need to be trimmed, we can get an alternate one out that is already cut. Just let me know. July should be okay.

Thanks for the write up! Seeing the write up now, I see why you had the issue with the laser cut fitment. The actually part of the Switch Pros panel has been revised slightly smaller, so if you had an older Switch Pros unit (which I am assuming you do), you had the first revision. That is why...

Awesome! Can't wait to see some installed pictures!

We are set at max preload with the 700lb coils which is at 3". We had to do the body mount chop but that was it. You will probably have rubbing issues with the 17x9

Icon Stage 8 w/ Stage 3 S2 setup 295/70/17 Toyo M/T

Hey guys! Just wanted to give you a heads up that we will be attending the Lucas Oil Off-Road Expo September 30th and October 1st at the Pomona Fairplex! We will be there selling all kinds of products and swag! For anybody looking to purchase stuff ahead of time, we will bring any orders placed...

PRODUCT OVERVIEW: -Mounting Plate mounts to existing factory mounting point in the '10-Current 4Runner -Hardware is provided -Simple and clean solution for mounting the switch-pro WHAT'S INCLUDED: - SDHQ Power Module Mount Plate - Mounting plate hardware package (3) Push In Zip Ties (2) M8...

We came up with a simply yet easy way to mount your Switch Pros in the 2014+ 4Runner platforms! Be sure to check out the Under Hood Module mount as well. Product Overview - CNC Laser cut and etched factory Toyota panel - Designed for a tight fit with Switch Pros Bezel Mount Panels - Included...