Recent content by Sierra946

Where am I shipping to? Zip code?

The other one is double purple blue white. They aren't supposed to be the same. One is slightly taller than the other to offset the gas tank being on the driver side. I had them on my rig until I put a CBI offroad rear bumper with tire carrier. I needed a spring made for the extra weight...

They're purple/green/white 8 wraps

Might have what you're looking for. Let me check the color codes to see the exact wraps.

I'd check the injectors and the fuel rail. My #4 cylinder fuel injector was leaking from the top o-ring where the fuel rail hooks up. Had to take off the plenum to find it though. Only way to see it on the driver side.

Temp gauge went dead a few months back. While I had the plenum off this week I swapped out the temp sensor in the intake manifold. The gauge on the dash is still dead. Any ideas?

Thanks. The spark plug had actually backed itself out and was a half turn away from coming completely out. The tip of it was almost half gone. I checked the rest of the spark plugs and they were all loose. I changed them 6 months ago and they were all torqued to 13 ft/lbs. What the heck...

Which cylinder is cylinder #4 on 3.4? Need to diagnose if it's a coil pack or fuel injector.

Yes, I was in the rock quarry. I was climbing a 4' shelf. Just as my rear tires were about to clear the top, they grabbed and bounced the rear off the ground. As I came down with the tires spinning, I snapped the rear u-joint. Swapped that out on the trail in about 30 minutes. As soon as I...

Allow plenty of time. The bolts on top of diff that need to be removed are a real PIA.

Billy Goat

Did you reconnect the sway bar end links? How old are your lower ball joints? Did you retorque the axle nut to specs so it's seated all the way in?

I never said you had to do any of that to fit 35's boss. I have 35's and didn't do any of that. Just a lot of work in the wheel well as you said.