Recent content by Some1esle

  1. Some1esle

    Hi-po fully synthetic oil OK for 3VZ-E V6?

    A 91' I would not put a synth oil in it. Here's why. Over time the seals and gaskets set, get dry, become weak and sometimes it's just the git and grime that is holding back the oil from leaking. If you were to put a synthetic oil in it runs a good chance of doing a bunch of cleaning the grit...
  2. Some1esle

    95 3.0 v6 4x4 auto OBDI codes 14 and 71

    Guess not. Guessing I'm on my own on this one.
  3. Some1esle

    Horsepower Help

    Really the only good HP increases are more air in, more exhaust out... Intake mod, and exhaust mod.. Neither is really cheap. But you can do both for under $700 if you can find the right stuff. I recommend you call magnaflow, and flow master and get advice.. This is true unless I missed...
  4. Some1esle

    95 3.0 v6 4x4 auto OBDI codes 14 and 71

    Both codes involve the ECU. SO, I suspect... About 220000 miles, have ran great until... I ordered the Bosch platnum +4 plugs from a dealer online. Gave the correct info/part number sent me the wrong plugs.. I didn't check the plugs, the guy has always sent the right stuff before. Anyway, after...
  5. Some1esle

    newer 4runner wheels

    Thanks... If I put the 265/65 16, or 17's.... They should be just slighly bigger than the 265/70-15 that came stock, or some came with 31x10.5x15, so some 265/65 16, or 17's should be just about right on the money... What I'm trying to accomplish is the "Big" off road look, with an SUV road...
  6. Some1esle

    newer 4runner wheels

    Come on now.... I know one of you guys has atleast tried to put the toyota 6 bolt wheels from a newer tacoma, 4runner, landcruiser, or sequioa on your rig... Or am I the only one dumb enough to let to cross my mind?
  7. Some1esle

    newer 4runner wheels

    WIll they fit a gen 2 4 runner? I'm talking about the 16, 17, 18 inch wheels... Thanks in advance...
  8. Some1esle

    "Pinson" Seal Home replacement or Pro?

    Yep, was leaking.... The dealer shop quoted me 1/2 hour to replace, and $7.70 for the seal. That comes out to about $50 in my book, and I can get it done while I'm at work. I have had way too much crap to do lately, and $50 to replace it sounds fair. Steve the Mech at the Dealership is a pretty...
  9. Some1esle

    "Pinson" Seal Home replacement or Pro?

    During the engine oil change they check all the fluids. Sorry I didn't mean to imply that I was having the Diff oil changed every 3K. what I meant to say was that as they check the oil, they check all fuild levels and lube at all the lube pionts. The guy at The Wally World Tire & Lube Express...
  10. Some1esle

    "Pinson" Seal Home replacement or Pro?

    While getting my oil changed at the local Wally World TLE, they declined the differential oil check becouse of Damaged Parts/Leaking Pinson Seal... Now they have changed the oil and did the full check the last three times.. The last one was the 20 soemthing of July, that's what 6 weeks, and just...
  11. Some1esle

    Idle Speed adjustment or is there more to it?

    Re: idle scerw Thanks. I'm pretty sure that the adjustment is just off.. I'll adjust it see what happens. then go from there.
  12. Some1esle

    Exhaust stink!

    EFI fuse... I had the 3 in pipes all the way back at first.... Yep, it was worse. I also experienced a major lose of power due to lack back pressure. That's why I dropped back down to 2.5 before the cat, and 2.25 between the cat and the muff. Oh ya I also had the Delta 40 single chamber on there...
  13. Some1esle

    Exhaust stink!

    I see... I need to do some tuning , so It will probably workout in that. Thanks
  14. Some1esle

    Turbo replacement

    You are welcome...

Members online

Forum statistics

Threads
278,307
Messages
3,554,056
Members
248,016
Latest member
Advally Service
Back
Top