Recent content by swapmeet

Just to button this thread up, I had a bad U-joint in the driveshaft. Had it rebuilt by a local shop and its good to go. Interestingly, they suggested that put new/ more grease in the U-joints every 6k miles. I typically put more grease in every never-thousand miles.

It's not pads, IT does it when I brake and the truck nose dives. I have Radflo 2.5's, and they're amazing off road but they nose dive a lot.

I can't seem to find one. I would think it exists. Anyone? I believe my slip yoke on my truck is disengaging too much when braking causing a vibration. (Max lift + Soft shocks+ Nose dive when braking.) So I was hoping to be able to throw a spacer in it to see if that fixes it. If its not...

bump

I'm always in 4wd... (V8, fulltime 4Hi) I'm not sure I could get to 40 in 4low.

bump

Bump

Thanks for the suggestion. It looks like those won't fit my truck (doesn't fit 2005+ 4runner) My understanding is that the lift changes the pinion angle as well as increasing the separation on the yolk because the distance from the center diff to the rear axle has increased. I'm not against...

ooookay… But Ebay is just a marketplace. Its up to you as a buyer to do your due diligence on a product you buy. How is it eBay's fault you bought junk. That's like you buying moldy Cool Ranch Doritos from your local grocery store and blaming the store. I mean, this has been hashed out at...

Mine did this recently (4th gen... but still) The drain hose for the AC was clogged with... who knows. Use compressed air to clear the line. If water doesn't come out... IDK what you have going on. If water pours out, that's your problem. But wait... theres more.. (INSERT BILLY MAYS...

Rust can exist under powder. I have proof. Plus powder will expose more metal when you drag it on rocks etc. Waste of money unless you're 100% mall crawler. Then its fine. Obviously the climate here in TX is different than yours in MI, but I think the way you went about coating them is the...

Hello, I've tried searching in a variety of ways and can't find an answer. So hopefully this isn't a wasted new post. Decelerating/ braking creates a vibration in the Driveshaft or U-joint. My truck is a 07 4x4 V8 lifted 3.5+" on Radflo 2.5 shocks, which are very soft. Because of the softness...

They have the exact same specs as the name brands that they're modeled after. Just missing the name brand and the mark up. So yes, caster is improved etc. I'm glad some of ya'll are having good luck with SPC. When I was trying to find arms was during the time SPC was junk (2015ish?) so I avoid...

No. Mine are still going stronk like bull tho. Zero issues.

I don't know what "known" means exactly. I mean... I know that theres issues. And i've tried to let other people know that there are issues. According to the tech guys at TT, they more or less know its an issue but won't address it. The rubber bushings don't last. I went through 3 sets. The...