Recent content by T4Life

Hi folks, I installed a new rear on my 4runner with an elocker recently, however the locker has a different gear ratio than my previous rear end and front diff. Would it be possibe for me to take the two rear diffs to a shop and have them swap in my existing ring and pinion into my locking...

Try jumping the Tc and E1 in the small diagnosis box under your hood and count the number of blinks to get your code. If this doesn't work, check your OBD fuse in the engine bay. I had a truck with and ABS light on and luckily it just turned out to be this fuse.

I ran the engine for a minute but it wasnt near fully heated. I did notice one wet plug and spray coming from one of the cylinders during the compression test (the source of my leaking water it appears). I just don't understand how water could be getting in if I have 150 psi across all...

Yes! The water is definitely getting burned off in the cylinders What is a block test? There are no codes, and no visible external leaks. I'm positive that somehow the water is leaking into the cylinders, but with good compression and cooling system pressure I'm stumped. It also sounds like...

Hey everyone, I recently bought a 96 4cyl standard 4runner with a coolant/water loss issue. The guy I bought it from said he was still using the truck to commute to work but was dumping a jug of water in the rad every two days. Yesterday I did a compression test and found there was at least...

I am tired of my the suspension on my 4runner, I know that the shocks are shot and ready to be replaced. Should I bother keeping my 11 year old coil springs and only buying new shocks? (probably tokico trekmasters) How much improvement will be made just by replacing shocks? Has anybody done...

Do you mean the chrome trim on the side of the running board? If so I still have it.

bump

Auto. How much for shipping to 98466? Thanks. $50 shipped.

Hey im lookin to do a tundra brake swap, anyone got calipers kickin around?

Pass. header and bumper signals are sold. Rear corner lights are still for sale. Pm your ZIP for shipping. Yes I can sell the brake pedal assembly, is it for a standard or auto truck?

I believe there are two good pieces, located at the front on the rear quarters. I've never seen any on the front quarters.

ttt.

Btt.

Well im in Canada so my parts stores are probably all different, just make sure their NGK dual electrode plugs, and dont bother with platinum ones. Also I think that giving the throttle body a thorough cleaning did more for my idle issue than the plugs did. Make sure all of the carbon is...