Recent content by T4Rzuniga

Bartlett Lake fun Current Suspension: Bilstein 5100 W/2012 Tacoma coil spring OME 889 Rear coils (need to be replaced) with 5100 rear shocks Running 285/70R17 BFG KO2 with 1.25" wheel spacers....and lots of trimming...:first:

My 2003 4Runner 4x4 Sport! Stock mudding! As it sits today:50cal:

You may have already touched on this, but does the stock jbl head unit have the right inputs to connect an amp and sub? Or did you get an after market deck?

Just some generic projectors off of Amazon, here's the links Amazon.com: 2 X Universal Gatling Gun Black Shroud For Retrofit Projector Headlights Lens: Automotive http://www.amazon.com/gp/product/B004G27PC4?psc=1&redirect=true&ref_=oh_aui_detailpage_o08_s00

Selling my projector retro fit kit for 3rd gen 4runners or 1st gen tacoma. Shrouds and projector lenses never installed, kept in box. 60$ shipped 50$ if you're in AZ PM me if you have questions.

I dont but now id like to know! haha if i find anything else ill let you know.

Not that i know of yet. only mods ive found have always ended up disabling the abs brakes.

i personally like this mod because its not any more ware and tear on additional drive terrain parts. also ive heard stories of the center lock not disengaging and locking up the tires if not cycled often. other than that, its all about preference. i liked how my 98 4x4 had no computer...

Fresh TRAC OFF switch write up for v6 and v8! give it a look! http://www.toyota-4runner.org/4th-gen-t4rs/207427-traction-off-switch-write-up-4th-gen-v6-v8.html#post2147371

This is the back of the switch insert, ground down so the switch can sit flush in the rear. Careful when grinding down the fins, making sure not to hit the main two clips on either end. For extra support behind the switch, Epoxy was added.

Very true, to figure which was on (for the TRAC to be turned off) and which was off (to turn back on). There were fins in the back of the OEM switch insert that we did have to grind down. in this we used a bench grinder. Thanks for the support and edits!

Frys electronics and most likely any store of that sort. Yes! Ive had great results using this mod in 2wd, 4hi and 4lo. As far as being 06 v8, i dont think that makes a difference with this mod. As long as youre ableto locate the pressure switch and its wired the same, you should be good.

Frys electronics and most likely any store of that sort. Yes! Ive had great results using this mod in 2wd, 4hi and 4lo. As far as being 06 v8 AWD, i dont think that makes a difference with this mod. As long as youre able to locate the pressure switch and its wired the same, you should be good.

Traction control off switch :couch2: WRITE UP HERE http://www.toyota-4runner.org/4th-gen-t4rs/207427-traction-off-switch-write-up-4th-gen-v6-v8.html#post2147371

I was still able to use the switch panel insert and just drilled through to mount the switch. THE HOT GLUE WAS ONLY TO HOLD THE SWITCH WHILE EPOXY SEALED THE SWITCH FROM THE BACK, I DID NOT HOT GLUE A SWITCH TO MY DASH Thanks for checking out my first write up! follow for more to come as...