Hey
I used to own a 2003 v8 limited and now jumped to a 2006 sr5 v8. I do all the work myself using amsoil. I just ordered 7 courts of 75w-90 gear oil for $85.00 and 7 courts of 5w-30 signature for 60.00. I plan on doing it all myself and so I'm in it about $145.00 along with the denso plugs at...
Simple and temporary fix. Took the three bolts off pulled back about half inch. Cleaned it very well. Apply honda bond around the entire solenoid. Reverse install. Now quarter size drip or two a day. Reduced to dime size a week or longer.
Ohms law. When you use the same size resistor and you put them in parallel the overall circuit resistance will be smaller then the single lowest resistor. for example. 1 divided by (1/.1 + 1/.1) = .05 Where if they were in series. Ohm law states all resistance is added. which would be .1 + .1...
update
I went ahead and installed two .1 ohm 1watt resistors in parallel and it works great. LEDS all around.
<img src="http://i92.photobucket.com/albums/l26/tacticalcustoms/4Runner/20130626_172404.jpg">
I didnt check before and after. But i put regular bulbs in for my drl and left led in rear worked just fine. However yesterday I received new cree led bulbs for my drl and when I put thosr in hyper flash came back. Reading on the tacoma forums. Im going to get three 2 watt .22 resistors and...
I was sick of the hyper blink from the LED's I had installed. I have found a work around from searching the web and from experience. I went ahead and did this today and it works. pictures follow.
Dash with two bolts that are located on the bottom left and right. once these are off you will then...
mod
Has anyone tried to mod the 12 pin relay so you can use LED's without the hyper flash. I know on my prelude I just removed one of the resistors in the relay. Has anyone tried to do this with the 12 pin DRL relay?
Found this. I'm going to give it a go. :D...
I thought the 4runner self times itself. Also I know you replaced your radiator etc but did you flush it. Also have you thought it might be a bad temp sensor or air in the system
alarm. I used to hide them like that.
http://wap.ebay.com/Pages/ViewItem.aspx?aid=121080537676&emvAD=315x470&sv=alarm%20valet%20switch&emvcc=0&nbcol=0%7Cnull