Recent content by The Shepherd

I am very proud for buying hooked on phonics for my babies back in the day, because now they know how to fill in all of the blanks in a job application and they can also read a second hand watch and give correct change back. Capt pike can I give you some future caree advice? Here it is " wood u...

A simpler way is to use a small flat blade screwdriver locate the slot on the cone wedge the screwdriver in the slot a few lite taps with a small hammer will expand the cone and you can remove the cone with the screwdriver.

I don't know if Toyota has a weight sensor under the drivers seat, if they do that would be another sensor to check out.

When I did my brake overhaul on my 1987 4 runner the tools I used are, metric flare kit, mini pipe cutter, three different pipe benders, flare wrench, drill w/ bits, vise, black magic marker, vac caps, turkey baster, and a mighty vac pump. Parts two coils of brake line , zip ties, one can of...

One sign of a engine burnning oil is White not black, I just serviced my head gskt on my 86 4 runner when I removed the exhaust manifold and inspected the exhaust ports all of my exhaust valves were White (burnning oil), valve stem seals, I was using about 1/4 of a quart of oil every fill up I...

Get some Trans fluid Dye from the auto parts store put in your trans drive around for a couple of days buy a black light and that will help you locate the leak, also check behind the straps that hold the trans lines to the bell housing I have seen the lines rot out from this area and if you...

One way to get a idea of what's going on with the inside of a Engine is to "Perform a Leak Down Test" the test will tell you what condition the piston rings and valves are in.

The name of the Tool is called "Air lift Coolant Tool", the brand name is Air Lift II part # 550500 and it sells for around $100.00 and without you will not be able to remove trapped air, how to use this tool is you first start be draining your coolant system install the tool in place of the...