Recent content by TheSpeakGeek

  1. T

    Fixed: Dead Instrument Cluster in 2003 Toyota 4Runner (Corrosion Issue)

    TLDR; Fixed dead instrument cluster in my 2003 4Runner Hey guys, after weeks of troubleshooting, I finally fixed the dead instrument cluster in my 2003 4Runner. It turned out to be a corroded and broken wire at the ring terminal of ground EF on the backside of the block on the driver's side...
  2. T

    Monroe OESpectrum Shocks

    I finally got the shocks on today; your suggestion finally did the trick. I took a gigantic pair of channel locks and squeezed things together enough to get the nut just barely started. And then was able to crank down on it with a wrench. Thanks everybody for your ideas. It all came together.
  3. T

    Monroe OESpectrum Shocks

    I took the passenger side rear shock off. I didn't even attempt to take the top nut off, I just cut straight through it with the sawzall and metal cutting blade. I started at the top and tried to get the bushings, washers, and nuts secured. No luck, there just doesn't seem to be enough threads...
  4. T

    Monroe OESpectrum Shocks

    I will give that a try on the other side since I'm replacing it too. That replacement shock is still in the box and hasn't been touched so it is still compressed and all. Going to run out to the garage and give that a shot now.
  5. T

    Monroe OESpectrum Shocks

    Thanks for the reply. I just went out to the garage to give this a try. I put the wheels back on and lowered it down to put the full weight of the truck on everything. I shook the crap out of it hoping to hear it pop and maybe settle a litte. It doesn't look like I got any extra room. I swear...
  6. T

    Monroe OESpectrum Shocks

    I have hit the 174k mark on my '03 4Runner and have decided I want to drive it for another 100k. I am doing a ton of work replacing worn out parts like the CV shafts, front struts, calipers, rotors, pads etc. I live in the rust belt and nothing about any of this has been easy. I am down to...
  7. T

    Intermittent Engine Starting/Running Issue

    I bought a new Camshaft Position Sensor from OReilly online. On the V6 model like mine, you have to take the serpentine belt off, then the alternator, and then unbolt the AC compressor. It was a lot of work to put the sensor on, but the job is done. While I was at it I also replaced the...
  8. T

    Intermittent Engine Starting/Running Issue

    The guys at my local shop gave up on me and told me to take it to a local Toyota shop. Last night while driving it home, the engine died on me again, almost silently. I didn't even know it had died until I noticed that the steering and brakes were gone. Luckily I had just pulled onto my street...
  9. T

    Intermittent Engine Starting/Running Issue

    I have run into an intermittent issue with my 03 4Runner (V6, 110k) where the engine won't start or won't stay running. This has happened to me twice in the past six months, never had a single problem with it before August.Each time it has been into the shop they were not able to find the...

Members online

No members online now.

Forum statistics

Threads
278,315
Messages
3,554,102
Members
248,016
Latest member
Advally Service
Back
Top