Recent content by unclebeansie

Are you able to check to see if a code got thrown that you need to clear? http://www.toyota-4runner.org/4th-gen-t4rs/192660-rear-hatch-malfunction-dealership-has-no-clue.html#post1969419

Coolant change for 1GR-FE - Toyota Nation Forum : Toyota Car and Truck Forums

Is your rear wiper and defog still working? If not, you could try this suggestion I made on another post: http://www.toyota-4runner.org/4th-gen-t4rs/192660-rear-hatch-malfunction-dealership-has-no-clue.html#post1969419

I'll second gza526's comment as the possible problem and fix. I had this happen to me a while back when I had the back hatch apart and was running wires for a reverse camera. I had unplugged the ECU for the back hatch to be able to unbolt some things to get better access but after putting...

I'd like to hear which module you used as well foxtrot and if and how you hooked up your rear window. I'm going to be installing a 4806v in my '07 in the next little while. For 1true34runner or anyone else reading this I confirmed and figured out all of the details about how to install this in...

I've got an '07 v6 and need to replace one of mine. DTC P0051 (Bank 2, Sensor 1) which I understand is the driver side one (for the v6) closest to the manifold. Question for you guys that have replaced these. Is 22mm the correct socket size and any tips for getting at it (it's a pretty tight...

Likely need a new thermostat. When they fail, they normally fail open and allow coolant through the radiator regardless of coolant temperature.

How did you mod the neo4 to get rid of the hot spot in the 4x4 switch?

No pictures for you, but I've had this set up on my '07 for a few months now and would say it looks pretty even. I read those same measurements on J.A.'s site which made me go this route and am happy with how it turned out.

Read deeper... the info on how to do the film for the LCD displays is in there. It's what I used as a DIY on reversing the polarity on mine a while ago.

If you plan on keeping your steering wheel controls with an aftermarket H/U and decide to go with the Metra ASWC (Metra Online) then it is worth checking out this harness (Metra Online) which will allow you to keep your factory AUX without having to cut any of the factory wiring.

Check out something like this... Metra Part # 70-1761 | Toyota wire harness | Metra Online Solder this to your JVC harness then plug right into the Toyota harness. That way you don't have to cut your factory Toyota harness.

You'll want #74 for those two as well as the glove box.

Yep, this is true, nor did they come with rear spoilers, only the Limited did.

2 separate parts; 1. Right Module #84244-35030-B0 2. Ribbon Cable #84204-58010