Recent content by vkw3592

Working on replacing some suspension parts( upper arm bushings, upper ball joint, lower ball joint, lower arm bushings), and after pressing out the old upper arm bushings and pressing in the new Toyota bushings, the upper arm would NOT go back on the car! The bushing sleeves are something like...

Milestone Today we hit 400,000 miles!

Hey man, clean install! Those lights are pretty bright. Makes me want to add some to mine. I was thinking about getting those rock lights to flash with your alarm, and i think it wouldn't be too hard. If you have an aftermarket alarm, there should be a wire that energizes the hazard light...

Man, don't worry too much about not building your own. I looked into putting one together myself, and to get the quality/brightness of the LEDs he's using would cost almost as much as the kit! I'm a little jealous though. My lady told me not to buy anything for my truck before the holidays, and...

You probably don’t need this any more since it’s been six months since you posted this, but the rear seat upholstery is held on by hog rings. Hog rings are like thick metal staples. You can use wire cutter, end cutter, or small bolt cutter to cut them. But you will need new ones to reinstall the...

Petition for Photobucket to reverse the third party block Hey guys. I don't post here often (or maybe at all), but I absolutely appreciate everyone's hard work and opinions about all of the mods and upgrades available for our beloved 4Runners. A huge part of most of these write ups are the...

Yeah, I was guessing at what year 4Runner you have. It's the same plug shape and general location of mine. The DRL module was taken out of the engine comparment in 01-02. I wish I knew what it was in your case. Good luck!

That plug... Hey guys, So, If i'm not mistaken, that is the plug that connects the harness to the daytime running light control module. The module is located next to the battery in the engine compartment, but when it is dosconnected the harness can fall into the area behind the bumper on the...