Recent content by wtfdissux2

only 2 ideas I got is from motor mount where the frame side connects to engine side. or is it by any chance a bolt used when it was on the cherry picker and not part of truck? dimensions might help (what size head, length thread size?)

I would replace the fitting and re flare. unless the fluid is on the treaded side of fitting then try to snug it down more or replace hose. it sucks but have had issues with new parts right out of the box before

Fixed! Pulled every bulb replaced fuse put bulbs in one at a time no luck close tailgate and fuse pops!:wtf: thanks to mtbtim and his video on the tailgate harness failure I found all but 2 wires broken or split replaced all but will close it up tomorrow I cant work at that height for very...

Just watched that (found with google) that harness is pita. Turned out to be the cause of losing all my tail and gauge lights. So glad you put it up cut my head scratching in half.

went to go out to do Uber deliveries tonight and poof no dash lights. from experience checked the tail lights and sure enough the only lights in back that are working ar stop/turn/brake. under dash 10a fuse is good when went to under hood box sure enough its blown. only had a 15a on hand but it...

recently rearended so sadly and desperately looking for a tailgate. due to the size and weight shipping it insane so must be within 100 miles of Buffalo NY and be functional (window and defrost must work and not rotted out while small dings and scratches I can live with)

Ok a little background June 3rd had rack & pinion replaced along with front brake pads and sway links. Then the next day was rearended and among other things that were damaged we had a horrible rattle noise to the point where only thing we could narrow down was its underneath. go figure silent...

ordered the bulbs and harness Bought the silverstar top rated and they were crap compared to my LED bulbs. So ordered the set up you mentioned. Got a link to the wire diagram so I can walk my son through the install?

Did little bit of searching and drew a blank. What is the bulb number your talking about or is it just an up powered 9003? Can they be run without harness or am I looking at a meltdown in wires or lens? I can build a harness at my desk and have my son do the actual "work" part of it but just...

If was still running the shop and had full use of my body I could do the upgrade. Am out on workers comp for shoulders then got rear ended (new liftgate and complete rear bumper but her 2011 pilot was totaled whe trailer hitch hit her engine). So kinda limited funding and ability so might just...

OK I know I am going to get roasted for this but here goes.... I dont have the $$$ or physical ability anymore to mod the lenses or buy ones that are allready modded, but really want to upgrade my lights. Not a fan of HID and really prefer LED but not in a hurry to blind everyone around me. Was...

quick and simple used some upper bushings and washers I had in tool box thanks guys!!

trying to find a shock for 3inches of lift since I broke one in half yesterday. to make it worse, need to drive 3 counties away tomorrow so they need to be something that can get at a "normal" parts supplier. on my old broncos I was able to look up the shocks by dimension and just walk in and...

need help my drivers seat just broke the seat back just decided I want to lay down while driving any guesses on what seats will bolt in and weather this one is fixable? the cushions are actually great but has had covers on them since day one and am second owner so interior has been taken good...

back to searching for parts and found a new question what is the frame RZN180/VZN180 designation? What are the differences? is it possible it is RWD and if so was not aware the rear suspension was different with 4WD vs. RWD?