Recent content by YouFools

RC swears up and down they sent me the correct parts. They even sent me a replacement set up front and it's the same exact lenghts on the springs and struts. I think I'll just part ways with the RC kit altogether.

I don't believe I have a body lift on this one. I have the liner just havent put it back on from having to remove for changing the UCA.

For your setup on the Bilstein / OME, did you go with 880's or 881's for the front? And did you do 906's in the rear?

I plan on keeping stock bumpers for the future.

Will try to make a long story short here. I have a 1998 2WD 4Runner SR5. I recently installed a 3" Rough Country true coilover lift (no spacers) with the upgraded V2 shocks in the rear. New OEM LBJ's, New whiteline LCA bushings, New Freedom Off-road UCA's. My current center wheel hub to bottom...

Oof. Looks like I need to figure out why a 3" lift is giving me 5" lol.

I'm hoping the same. If the new front kit doesnt work, I'm going to Bilstein 5100's / OME 880's. For reference too, the rear is 24" fender to lip at the moment. Do you happen to know what the stock measurements are? Is it 20" front and rear?

It has been attempted 3 times for an alignment. It is unable to be set. Cam bolts are not seized. Positive camber remains. Toe is even and good.

Revive this thread! Hoping to bring this one back. I lifted my 2WD with a Rough Country lift (coilover strut lift, not a spacer lift). Freedom Offroad UCA's Whiteline LCA bushings New OEM LBJ's I will post some pictures of my issue actually. Seems like my front lower suspension components are...

Meant to add this one as well

Hopefully pictures post correctly. I hvae full replacement shocks, no spacers. I don't know what the issue could be. New LCA bushings (Whiteline) and Freedom offroad UCA's as well to try and prevent alignment issues. But it's deflecting my LCA so far down like i took a mid air jump and never...

I did a Rough Country 3" lift on my 2WD. I know my front is too high and I don't know the reason. Causing strange deflection on my LCA and LBJ. Measured 25.5" both sides in the front. RC is sending me a new front setup since they agree that this lifted it too high. My thought is that even...

Muffed Alignment I'm at a brick wall with my issues. All alignment and suspension geometry related. I want to make a thread for it but since I'm "new" it won't let me post :(

Purchased 3" RC Lift I put the 3" lift on mine with Freedom Offroad UCA's. I'm having weird issues with the LCA and LBJ at a very strange angle. And my alignment cannot sit right (about +2 camber and caster at about 1.3). going to make a post about this soon and see if anyone has had this...