06-09 4runner headlight/foglight install/aim

[super2kc]

Spent a considerable amount of time searching for a writeup specific to aiming headlights for 06 through 09 4runners using projector housings, I was constantly finding information only for 03-05 with the dual screw aiming option.

Where as the 06-09 only has a single screw aiming feature for the headlight, and one for the fog light.

Then I found this awesome page on the TOP4RUNNERS site.

Thought I would share here

https://www.top4runners.com/ja/2007/hid.html
http://www.top4runners.com/ja/2007/hid/headlightaim.pdf
http://www.top4runners.com/ja/2007/hid/fogaim.pdf

 

[riceandpho]

its the same as the 03-05 reflector, the bottom screw is for height, then theres a screw on the corner for the left and right adjustment.

a good adjustment for height on stock height is 2.5 inches down from center height of projectors.

a good adjustment for lifted runner is 3 inches from the center of projectors.

 

[Terminator03]

its the same as the 03-05 reflector, the bottom screw is for height, then theres a screw on the corner for the left and right adjustment.

a good adjustment for height on stock height is 2.5 inches down from center height of projectors.

a good adjustment for lifted runner is 3 inches from the center of projectors.

That is some great info (as is the links provided by the OP). What distance is that dimension taken from though (away from the wall)?

 

[riceandpho]

That is some great info (as is the links provided by the OP). What distance is that dimension taken from though (away from the wall)?

25 feet from wall