2010 4Runner Suspension Service and Repair Manual

Register to hide this ad
Usually you would just use a grease gun and grease the u-joints every now and again. More often if you're in the sand a lot or driving through water/mud. There should be fittings on the rear drive shaft and on the front one if your's is a 4x4. I haven't personally checked to see if the 4runner has them, but my Tacoma did so I'm assuming the 4Runner does too.
 
Usually you would just use a grease gun and grease the u-joints every now and again. More often if you're in the sand a lot or driving through water/mud. There should be fittings on the rear drive shaft and on the front one if your's is a 4x4. I haven't personally checked to see if the 4runner has them, but my Tacoma did so I'm assuming the 4Runner does too.

Thanks. It's listed as a maintenance item in my owners manual so I'm hoping it's as easy as some grease fittings.
 

Members online

No members online now.

Forum statistics

Threads
278,316
Messages
3,554,121
Members
248,016
Latest member
Advally Service

Trending content

Back
Top