hikenbike
New member
It's still superior if you're talking about off-road (which is really where BoF shines and why most everyone on this forum owns a 4Runner), it handles flex and torsion far better than a unibody does. The only unibodies you see off-road that don't need to be welded back up after a couple of uses are dedicated tube frames if you consider that a unibody.
The whole "Unit-Frame" excuse where they throw a rail under the body to "strengthen" it was and is done by Jeep and every non-Wrangler Jeep owner I know that bothers to off-road has either reinforced the hell out of their unibody with an exo/endo cage, frame brackets, ect. or are re-welding their unibodies regularly; or just outright getting new unibodies and transfering everything over to them once they crack up.
But again, I started my original response with "besides off-road" and in my other posts I mentioned specific uses where it doesn't stack up against a BoF Truck/SUV (Rural uses where off-roading becomes a necessity/common occurrence vs. Family or Commercial Use and thus a BoF Truck/SUV would be a better choice; a niche area by the way) I separated the three areas where to me the Ridgeline didn't really stand out or feel like it was better than alternative (3 areas that are typically thrown at me as where it shines.) It's unibody construction is not something that appeals to me nor that makes me think it's a worthwhile vehicle for specific uses, but as a family/commercial vehicle that can be overlooked as a BoF vehicle isn't really needed in those situations either.
BWorks, I'm sorry, but you can stop now. If Thai says you're flawed then you're flawed. That's it!
Thai knows all. Case closed.