3" lift with stock tires

[Net4n6]

Does anyone has the picture of stock 4R with 3" lift and stock tires? I searched like crazy but couldn't find one with stock tires.

 

[AlexJet]

I'm sure some guys done this as a waypoint to a "new height". Most people doing the lift with upsizing the tires.
Wait a sec, I think I know one:

 

[Net4n6]

Thank you for the pic. How come the lift kit doesn't level out the truck as well? Not bad for stock wheels and tires.

 

[AlexJet]

The picture I attached is for Cornfed lift. It's leveling kit: 3" front + 2" rear.

 

[Net4n6]

Thank Alex.

The rear still look a bit higher than the front. I will look into this mod in the near future. Your 4R looks great.:beer: You used it the way its suspose to be used.

 

[AlexJet]

Thank Alex.

The rear still look a bit higher than the front. I will look into this mod in the near future. Your 4R looks great.:beer: You used it the way its suspose to be used.

Thanks.
Wait a month or two. You may find some interesting mods in my signature

 

[MnRunr]

The rear still look a bit higher than the front..

without measuring, it looks like the road is slanted left to right, affecting the rake of the truck..

EDIT: I dont have this lift, its just how the pic looks to me.. I believe others have said it does a good job of leveling the truck..

 

[PaulSula]

Thank you for the pic. How come the lift kit doesn't level out the truck as well? Not bad for stock wheels and tires.

Just did this lift. While you are right it does look like there is more clearance on the back, the rake has been removed. If you want a side by side, check on my post called, "lift on the way" or something like that in the off road section. Oh and I know these are not stock tires.

 

[jaybird93000]

So obviously it's been a while since you were on here, but Alex, do you still have the picture? it's gone away...

 

[AlexJet]

So obviously it's been a while since you were on here, but Alex, do you still have the picture? it's gone away...

I can see the image. ...
Anything you looking in particular?

 

[jaybird93000]

just want to see how a 3/2 lift looks on stock tires. Mine'll be Cornfed, but i'm not picky. Just wanna see how small the tires and rims'll look, granted I do have the 18" Limited wheels, but still.

 

[AlexJet]

Its been a while since I had Cornfed. I changed 4-5 setups since then. Now with 5.5" custom Long-Travel and 35s its even more difficult to remember.
I'll see if I can truck something down...

 

[jaybird93000]

Alex, your ride is absolutely perfect and well deserving of winnin TOTM every month. WOW. Thanks for helpin' me out

 

[Presta24]

I just put the front on last weekend, going to put the rear on this weekend, I have a pic of it with just the front kit on, ill post a pic of it complete this weekend, my rims are stock, tires are dakota at's 265/70r16, soon to be bigger hoping. I used the daystar 2.5/1.5 kit

 

[absolute yota]

3 inch lift w stock tires

 

[OCTT4R]

I put this on another thread but I will post it here too in case anyone is looking for more recent pics of a 3” lift with stock wheels and tires. 2019 SR5 4x4. I do plan to put bigger tires on once I get some good use out of the stock tires. 3” isn’t too drastic so the stock wheels and tires still look okay.

 

[Makakilo]

Does anyone has the picture of stock 4R with 3" lift and stock tires? I searched like crazy but couldn't find one with stock tires.

I did a 3" lift Sunday morning. I still need to get new tires. I have 30" tires now and will be bumping up to 32"-33"

 

[Net4n6]

Wow... You just brought back a 13 yrs old thread :lmao:
BTW. I still have the 4runner with 33" tires.

 

[Dillusion]

Since its alive see my link in sig.